UniqueKiosk · Shenzhen workshop
Veneer Trim Glass Vitrine Cabinet With Four Shelves
$760.00
Glass display case with wood veneer top and base, four shelves, two glass doors and locks, sized 1.0 x 0.4 x 1.85 m. Price range: USD 300-1,500, set by size and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Veneer Top and Base
A wood veneer top and base frame this glass display case. The top cap is 200 mm tall and the base 150 mm, both faced in a red brown veneer. Veneer sits on 18 mm board with a matte clear coat. A plinth band runs under the base for a shadow line. The case between them is all glass, so goods read from both ends. Height totals 1,850 mm with a 400 mm depth. This glass display case suits a boutique with wood shelving. The display cases range keeps the same cap profile.
Glass Box and Doors
The glass box of this glass display case is 1,000 mm wide and 1,450 mm tall. Panels are 6 mm clear glass with polished edges. Two hinged doors run at the front, each 480 mm. Locks sit in the centre stiles with one key per door. The rear is glass, so a shop can back it against a window. Staff reach in through a 900 mm opening. Every glass display case gets a door alignment check before packing. Hinges are stainless pin type.
Four Shelf Layout
Four glass shelves split this glass display case into five levels. Shelves are 6 mm with polished edges, rated 12 kg. Brackets are small metal clamps on the uprights, so shelf height moves in 30 mm steps. The lowest shelf sits 250 mm above the base for tall goods. Top level reads near 1,700 mm, inside adult eye line. countertop cases cases use the same clamp style. Shelf depth is 340 mm with a 40 mm label gap at the front.
Frame and Build
Silver uprights hold the glass in this glass display case. Uprights are 20 mm steel tube with a satin coat, joined by top and base plates. Glass sits in a gasket channel at each edge. Veneer panels are glued and edged, then clear coated in a booth. Every glass display case is assembled, loaded and levelled on a bench. Packing keeps glass flat in a separate sleeve. retail display fixtures crews set the doors after the shelves.
Retail Placement
This glass display case suits gifts, ceramics and small homeware. A 1 m footprint fits a 2.5 m wall with a stock trolley at one end. Wood trim reads warm under spot light and ties to timber shelving nearby. The rear glass lets a shop stack two cases back to back. Power is not built in, so a light bar is an option. Staff restock through the front doors in the morning. Many cash counter points sit at the entrance wall. The shop fit outs package adds a low display bench.
Price and Custom Build
Wood trim makes a glass case sit well in a boutique interior. Two doors give fast access during a busy hour. Four shelves fit five price bands in one square metre of floor. List price starts at USD 760 for the 1 m unit. A 1.2 m build with a light bar lands near USD 1,080. ukiosks builds this glass display case to order in Shenzhen. We can reset height, shelf count, veneer tone and frame finish. Send your plan and we return drawings and a quote. Nearby food and drink shops shops use the same base.
| Specification | Detail |
|---|---|
| Overall size | 1.0 x 0.4 x 1.85 m (custom 0.8-1.4 m) |
| Glass | 6 mm clear panels, 6 mm shelves |
| Shelves | Four shelves, 12 kg each |
| Doors | Two hinged glass doors with locks |
| Trim | Wood veneer top and base |
| Frame | 20 mm satin steel uprights |
| Packing | One crate, about 92 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:
Slatwall Hook Display Stand, Timber Panel 1.9 m
Price:
Violin Exhibition Display Case, Glass Tower 1.8 m
Price:








Reviews
There are no reviews yet.