UniqueKiosk · Shenzhen workshop

Mobile Shop Wall Display Units, White Shelves 1.2 m

$980.00

A white wall display cabinet with five sloped shelves, a slatwall back and a lockable base. Built for phone shops and accessory walls. Price range: USD 850-1,150, set by width and cabinet size.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

One Cabinet, Two Zones

A wall display cabinet for phones needs open shelves and a locked base. This unit gives five sloped shelves above a two-door cupboard. A slatwall panel sits behind the top row. The 1.2 m width fits a narrow bay between two counters. One cabinet then shows live stock and holds boxed stock below. A wall display cabinet like this suits a shop that sells handsets and accessories. A retail slatwall run can sit beside it.

Shelf and Panel Build

Shelves are 18 mm board with a 5 degree slope toward the shopper. Each shelf carries 12 kg. A wall display cabinet needs this slope so boxed phones face the aisle. The back panel is slatwall, which takes pegs for small packs. Body panels are white melamine faced board. Edges take a PVC band, so the white line stays tight. Shelf pitch follows our retail shelving stock.

Specification Detail
Size 1200 x 400 x 2200 mm
Shelves Five white shelves, 5 degree slope
Back Slatwall panel behind the top row
Base Two-door cabinet with cam locks
Body 18 mm white melamine faced board
Shelf Load 12 kg per shelf
Finish Matte white, PVC edge band

Base Cabinet

The base is a two-door cupboard with cam locks keyed alike. Inside, one adjustable shelf splits the space. Staff store cases, chargers and boxes here. A wall display cabinet with a locked base keeps stock safe after hours. Doors open 110 degrees on concealed hinges. The plinth sets back 40 mm, so toes clear the doors. A wall display cabinet with this base also hides spare signage. A wall display cabinet of this size also needs a level floor.

Wall Fixing

The cabinet fixes to a wall through two top brackets and a base rail. A wall display cabinet of this height must tie to studs or a masonry wall. Brackets sit behind the top shelf, so nothing shows inside. The base rail keeps the plinth off the floor by 10 mm. Levelling shims come with the kit. One fitter sets the unit in about 90 minutes. A wall display cabinet of this height needs two fixing points.

Where It Sells

Phone shops use two or three cabinets along a brand wall. Accessory corners place one at the entry. A wall display cabinet also fits a repair counter or an airport kiosk. The 400 mm depth keeps the aisle clear. Our wall mount displays range covers glass door variants. Add a display counter for trade-in work. A cabinet with a slatwall back can also take a poster frame.

Why This Build Works

Sloped shelves show boxed phones without a riser. Slatwall takes pegs for cables and cases. The locked base keeps stock out of reach at night. A wall display cabinet like this also ships flat for site assembly. White body matches most phone shop interiors. List price starts at USD 980 for the 1.2 m cabinet. ukiosks can change width, shelf slope and lock type. Send your brand wall plan to our team. Base locks come from our lock and light range.

Reviews

There are no reviews yet.

Be the first to review “Mobile Shop Wall Display Units, White Shelves 1.2 m”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop