UniqueKiosk · Shenzhen workshop

Violin Exhibition Display Case, Glass Tower 1.8 m

$1,450.00

A violin display case in a sealed glass tower with two top lights and a mid shelf. Built for exhibitions, halls and auction rooms. Price range: USD 1,200-1,700, set by height and light kit.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

A Case Built for One Object

A violin display case has to protect a single fragile object. This tower gives 1.8 m of clear glass on four sides. Two LED spots sit in the top box and point down. A mid glass shelf splits the interior into two zones. The black plinth carries four castors for movement. A violin display case of this height lets a visitor see the whole body at eye level. See our retail display case range for lower heights.

Frame and Glass

The frame is 40 mm black steel tube, powder coated. Panels are 6 mm tempered glass on all four sides. A hinged glass door runs the full height on one side. A violin display case needs a tight door seal against dust. Edges take polished glass, so nothing distracts from the object. Frame joints are welded and ground flat. A violin display case at this size uses one door, not a lift-off hood.

Specification Detail
Size 500 x 500 x 1800 mm
Frame 40 mm black steel, powder coated
Glass 6 mm tempered, four sides and door
Shelf 8 mm glass, adjustable height
Lighting Two 3W LED spots in the top box
Base Black plinth with four castors
Lock Cam lock in the door rail

Light and Shelf

Two 3W LED spots sit in the top box on a dimmable driver. Light lands on the instrument, not the glass. A violin display case with top light avoids reflections from side lamps. The mid shelf is 8 mm glass and adjusts on four pins. Below the shelf, a shelf pad can take a bow. Drivers sit in the plinth with a vent gap. Drivers match our lock and light parts.

Plinth and Movement

The base is a black plinth 250 mm high. Four castors sit under it, two with brakes. A violin display case of this type moves between halls without a trolley. The plinth top carries the glass frame on a gasket. A cam lock sits in the door rail at mid height. Levelling pads take up floor slope when the castors are locked. A violin display case on castors still needs two people for a move.

Where It Shows

Museums use it for a single instrument on loan. Auction houses place two side by side. A violin display case also suits a music school hall or a luthier showroom. The 500 mm square footprint fits a narrow aisle. Our museum display cases range covers wider formats. Add a glass display case for sheet music and bows. A card stand can sit beside the case with the object history.

Why This Build Works

Four glass sides remove the need for a viewing window. Top spots keep the instrument lit without glare. The mid shelf holds a bow or a programme. A violin display case like this also ships in two crates for safe handling. The plinth hides the driver and cabling. List price starts at USD 1,450 for the 1.8 m tower. ukiosks can change height, light output and base finish. Send case size and object weight to our team. A store showcase tower can flank the case.

Reviews

There are no reviews yet.

Be the first to review “Violin Exhibition Display Case, Glass Tower 1.8 m”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop