UniqueKiosk · Shenzhen workshop
Perforated Back Steel Display Rack Single Sided
$545.00
Single sided steel display rack with a louvered slat back panel and five shelf plates. Price range: USD 545-760, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Slat Back Wall
A louvered slat panel closes the back of this display rack. The slats run in tight rows from the base to the top frame. A shop hangs a hook, a sign or a small bin on any slat row. The panel also gives the rack a solid face, so a bare wall behind stays hidden. This display rack reads as one unit from the aisle side. Display racks list this slat pitch.
Five Plate Rows
Five shelf plates stack on this display rack, and each plate carries a white price strip. The plates run 450 mm deep, so a bottle row sits two deep. A shop adjusts a plate up or down on the slot rail in one minute. The base plate takes the heavy bulk stock at floor level. Display shelves share this plate depth.
Single Sided Save
One selling face keeps this display rack tight against a wall. The unit runs 350 mm deep at the frame, so a narrow aisle keeps its width. A shop sets the rack on a plain wall and gains a full product line in 2 m. The single face also cuts cost against a double sided gondola. Retail displays fixtures fit the same wall.
Shop Use
The display rack suits a convenience store, a pharmacy or a small grocery. Five rows hold drinks, boxed goods and small hardware in one line. A shop keeps 900 mm clear in front so a trolley passes. The slat back of this display rack also takes a promo sign at eye level without a separate stand. Countertop displays fit the same till zone.
Load And Care
Each plate holds 50 kg on this display rack, and the base holds 80 kg. Keep the heavy bottles on the low plates, since the slot rail bears more load near the base. A loaded unit stays level within 2 mm along the base plate. Check the plate bracket after a month, since a loose bracket lets a plate dip. Wipe the slats and keep the strips clean. Read more about our bench on our slat frames.
Size Options
Width runs from 900 mm to 1200 mm on request. Height runs at 1600 mm or 1900 mm. A shop can order a header frame with no sign for a plain wall look. The plates come in steel or in a wood finish on the low row. The frame also comes in white or graphite. List price starts at USD 545 for the 900 mm unit. ukiosks builds this display rack in Shenzhen to order, so send your wall plan through contact us.
| Specification | Detail |
|---|---|
| Width | 900 mm |
| Height | 1800 mm |
| Depth | 450 mm |
| Back | Louvered slat panel |
| Plates | 5 with price strips |
| Load | 50 kg plate, 80 kg base |
| Finish | Matte black powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Double Bay Bronze Garment Rack, Wood Deck 2.2 m
Price:
Slimline Gold Garment Rack, Base Deck 1.2 m
Price:
Pedestal Glass Display Case, Gold Trim 1.4 m
Price:








Reviews
There are no reviews yet.