UniqueKiosk · Shenzhen workshop

Slimline Gold Garment Rack, Base Deck 1.2 m

$420.00

A slim gold garment rack with a single hang rail and a shallow base deck. Two top prongs hold spare hangers. Price range: USD 320-480, set by rail length and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Thin Tube Frame

A garment rack can carry its own design weight. This unit uses 25 mm square tube in brushed gold. Two uprights rise from a shallow base deck and cross at one top rail. Nothing else sits between the posts, so light passes through. A garment rack of this shape reads as furniture, not storage. It suits a window or a small boutique floor. The open frame also keeps the stock visible from both sides. Frame stock follows the single bar rack line.

Rail and Prongs

The hang rail runs 1.2 m at 1.4 m height. It carries 25 kg, about ten light garments. Two double prongs sit on the top return and hold spare hangers. A garment rack with prongs keeps the rail clear during a restock. Rail ends weld into the posts, so no bracket shows. The rail is 22 mm round tube with a satin gold finish. Hangers slide without a catch at the joint. Hanger stock sits in the rack accessories range.

Specification Detail
Size 1200 x 450 x 1500 mm
Frame 25 mm square gold steel tube
Rail Single hang rail at 1400 mm
Prongs Two double hanger prongs
Base Gold edge deck, 25 mm top
Finish Brushed gold, clear coat
Load 25 kg on the rail, 15 kg on deck

Base Deck

The base is a 450 mm deep deck with a gold edge band. The top face is a pale stone look laminate at 25 mm. Shoes, folded knits or boxes sit here without sliding. A garment rack with a deck replaces a side table in a small bay. The band lifts 30 mm and hides the deck core. Corners mitre and polish, so the gold line runs unbroken. Deck load holds at 15 kg. Deck tops match store fixture laminates.

Finish and Assembly

The frame takes a brushed gold coat over a clear sealer. Salt spray resistance holds at 200 hours, which suits indoor retail. Posts bolt to the deck through two plates each. A garment rack like this ships flat, with the deck and frame in one crate. Site build takes about twenty minutes with an hex key. No wall fixing is needed, so the unit moves with a floor reset. Levelling feet sit under the deck corners. A garment rack at this span also fits a menswear corner.

Where It Sells

Boutiques place one rack per window. Concept stores pair two at an entry. A garment rack also fits a bridal studio or a hotel shop. The 1.2 m span keeps a walkway at 1.4 m. Our clothing racks range covers taller frames. Add a clothing display rack for bulk stock. A rack at this width also fits a small bridal fitting corner.

Light Frame, Clear Line

A thin frame keeps the shop airy and the garments in front. The base deck adds a second display level without a second unit. Gold finish warms a white interior. A garment rack of this build also ships as one crate, so freight cost stays low. Two bolts per post make the site build simple. List price starts at USD 420 for the 1.2 m rack. ukiosks can change rail height, frame width and finish. Send your window size to our team.

Reviews

There are no reviews yet.

Be the first to review “Slimline Gold Garment Rack, Base Deck 1.2 m”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop