UniqueKiosk · Shenzhen workshop

Double Bay Bronze Garment Rack, Wood Deck 2.2 m

$780.00

A clothing rack with two hanging bays and a full width wood deck. Four posts hold two rails at work height. Price range: USD 620-900, set by length and deck finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two Bays One Deck

A clothing rack can split into bays and still read as one piece. This unit runs 2.2 m with a centre post between two rails. Four posts stand on a full width wood deck at the base. Each bay hangs about ten suits at 80 mm spacing. A clothing rack with two bays keeps categories apart on one run. The wood deck below carries shoes and folded stock. One crate ships the whole frame. Rail stock follows our clothing racks range.

Bronze Frame Build

The frame is 32 mm square tube with an electro bronze finish. Posts weld to a top cross beam, which squares the frame under load. A clothing rack needs a braced top, because two rails pull sideways. A centre post splits the span and cuts rail sag. Clear matte coat resists fingerprints in daily handling. Corner joints grind flat before coating, so no step shows. Fixings sit inside the post profile. Tube sizes match the fixture hardware list.

Specification Detail
Size 2200 x 500 x 1500 mm
Frame 32 mm square bronze steel tube
Rails Two hang rails at 1250 mm
Deck 18 mm wood board, 500 mm deep
Posts Four, bolted to the deck
Finish Electro bronze, matte clear coat
Load 30 kg per rail, 40 kg on deck

Wood Deck Base

The deck is 18 mm wood board at 500 mm depth. A straight edge band runs around the perimeter. Posts bolt through the deck into a steel sub frame. A clothing rack with a wood base reads warmer than a metal shelf. The deck carries 40 kg of shoes, boxes or folded stock. Surface takes a matte lacquer, which hides small scuffs. Deck height sits 120 mm off the floor on the sub frame. Deck boards come from the store fixture line.

Rail Heights

Both rails sit at 1.25 m, a height that clears long coats. Rail ends run into the posts with no bracket. Each rail holds 30 kg of garments on wood or plastic hangers. A clothing rack at this height also leaves space for a shelf above. A second cross beam sits at 1.5 m for folded stock. The span between posts comes in at 1.05 m per bay. Hangers move from bay to bay without a catch. A clothing rack this wide also fits a sample sale room.

Where It Sells

Menswear shops use one rack per size run. Suit rooms place two side by side. A clothing rack like this also fits a costume store or a photo studio. The 500 mm deck depth keeps an aisle at 1.2 m. Our storage racks range covers single bay frames. Add a single bar rack for window pieces. A rack at this length also suits a stock room handover bay.

Built for Full Rails

Two braced bays hold a full size run without sag. The wood deck adds a shoe level at no extra footprint. Bronze matte finish suits dark tailoring. A clothing rack of this build also breaks into two crates for a lift. Four bolts per post make the site build quick. List price starts at USD 780 for the 2.2 m frame. ukiosks can change bay count, rail height and deck tone. Send your size run to our team.

Reviews

There are no reviews yet.

Be the first to review “Double Bay Bronze Garment Rack, Wood Deck 2.2 m”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop