UniqueKiosk · Shenzhen workshop

Pearl Rolling Clothing Rack with Ring Crest

$268.00

Ivory rolling clothing rack with a ring crest, a 1200 mm rail and four castors. Price range: USD 268-390, set by rail width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Ring Crest Top

A row of small open rings runs along the top of this clothing rack. The crest sits above the hanging rail and adds 80 mm to the frame height. Each ring is brazed to the rail below, so the line stays rigid. A shop uses the crest for a pale, decorative finish without a shelf. The rail under it carries the load. The ivory powder coat keeps the rings crisp against a plain wall. Display racks use the same crest line.

ring crest clothing rack

Frame And Rail

The frame measures 1200 mm wide and 1500 mm tall. Two uprights of 25 mm tube carry the crest and the rail. The rail sits 1500 mm from the floor and runs the full width. Uprights carry holes at 50 mm pitch for a second rail. A shop hangs twelve to fifteen pieces on the main rail. A finished clothing rack holds 45 kg across the span. Retail displays fixtures share this tube frame.

clothing rack crest front

Castors And Shelf

Four castors sit under the base of this clothing rack. The base rail doubles as a low shelf for shoes or boxes. Two castors lock and two swivel, so staff steer it down an aisle. The base spread measures 450 mm front to back for stability. A boutique moves the unit to a window in a minute. The shelf clears the floor by 100 mm. Clothing racks list the same base.

clothing rack frame side

Window And Floor

The clothing rack suits a window set, a small shop floor or a market stall. The open frame lets a shopper see the wall behind. A boutique hangs a single colour story across the rail. Staff roll the unit out at closing and park it in a stock room. The pale frame works with timber, concrete or white plaster. Countertop displays fit the same floor bay.

Load And Care

The rail takes 45 kg when weight spreads along its length. Keep the heavy end near an upright, since a rail bends at mid span. A loaded clothing rack stays level within 2 mm along the rail. Lock both castors before loading the upper rail. Wipe the ivory coat with a dry cloth, since dust shows on pale paint. Read more about our bench on our coating work.

clothing rack ring detail

Width Options

Frame width runs from 900 mm to 1500 mm on request. Height runs at 1500 mm or 1650 mm, and the crest adds 80 mm. A second rail can be added at 1100 mm for a two tier clothing rack. The crest also comes as a plain cap rail. List price starts at USD 268 for the 1200 mm unit. ukiosks builds this clothing rack in Shenzhen to your width, so send your plan through contact us.

Specification Detail
Width 1200 mm
Height 1500 mm plus 80 mm crest
Frame 25 mm steel tube
Rail 1200 mm, 1500 mm high
Base Castor base with shelf rail
Load 45 kg
Finish Ivory powder coat

Reviews

There are no reviews yet.

Be the first to review “Pearl Rolling Clothing Rack with Ring Crest”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop