UniqueKiosk · Shenzhen workshop

Panel Mesh Steel Display Rack with Three Bays

$724.00

Three bay display rack in matte black steel with wire mesh panels and brass hanging rails. Price range: USD 724-1180, set by bay count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Three Bay Layout

Three bays stand in one line on this display rack, and each bay shares a post with the next. A shop sets a full outfit in one bay and repeats the pattern across the wall. Bay width runs 700 mm, so the unit covers 2100 mm of wall. The open sides let a shopper walk along the whole row. Display racks list this bay frame.

panel mesh display rack

Mesh Upper Panels

A wire mesh panel fills the upper part of each bay on this display rack. The mesh runs from 1500 mm to 2000 mm and sits above the shelf plate. A shop clips a paper card or a small hook to the mesh. The open mesh also lets a ceiling spotlight reach the shelf below. Retail displays fixtures share this panel height.

display rack three bays

Brass Hanging Rails

A brass rail runs under each shelf plate on this display rack. The brass tone sits against the matte black frame, so a shopper spots the rail edge at a glance. A shop hangs 12 garments per rail and keeps the folded row on the plate above. The rail bolts to the post and comes off for a repaint. Clothing racks list this rail fix.

display rack bays side

Shop Use

The display rack suits a menswear floor, a concept store or a hotel wardrobe wall. Three bays hold suits, folded shirts and a bag row in one line. A shop keeps 1200 mm clear in front, so a shopper steps back to read the whole wall. The low base plate of this display rack closes each bay and hides the frame feet below. Display shelves fit the same bay.

Load And Care

Each shelf plate holds 45 kg and each rail 35 kg on this display rack. Keep the heavy outerwear on the rail and light stock on the upper plate. A loaded unit stays level within 2 mm along the base. Check the post bolts after a month, since a loose bolt lets a bay sway. Wipe the mesh and keep the brass dry. Read more about our bench on our bay frames.

display rack mesh joint

Size Options

Bay width runs from 600 mm to 900 mm on request, and bay count from one to four. Height runs at 2000 mm or 2200 mm. A shop can order a drawer base for one bay or a glass plate instead of steel. The frame also comes in chalk white with a steel rail. List price starts at USD 724 for the three bay unit. ukiosks builds this display rack in Shenzhen to order, so send your bay plan through contact us.

Specification Detail
Width 2100 mm
Height 2000 mm
Depth 400 mm
Bays 3 x 700 mm
Panels Wire mesh, upper part
Load 45 kg plate, 35 kg rail
Finish Matte black with brass rail

Reviews

There are no reviews yet.

Be the first to review “Panel Mesh Steel Display Rack with Three Bays”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop