UniqueKiosk · Shenzhen workshop
Orla Clear Acrylic Hanging Safety Partition, 800 mm
$95.00
Safety partition in clear acrylic, hung from a ceiling by two steel rods and clamp plates. Price range: USD 95-210, set by panel size and hardware.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Panel Size
This safety partition runs 800 mm wide and 600 mm tall. A safety partition with a rounded corner takes no sharp edge at a hand. The sheet is 5 mm cast acrylic, so it reads clear from both sides. The top edge carries two clamp plates at 300 mm centres. The panel hangs at 400 mm above a counter deck. A guard takes a card and a parcel through the gap under it. A display counter sets the hang height.
Acrylic and Clear Face
The sheet is cast acrylic, not an extruded roll. A safety partition in cast sheet keeps its clarity after a wipe. The edge is polished, so it reads bright under a lamp. The face carries no tint, so a note behind it stays readable. A cloth with water takes dust off. A deep scratch does not split the sheet, since cast stock holds together.
Rods and Clamps
Two steel rods drop from a ceiling plate to the panel. A safety partition with a clamp plate sets the height in one loosen. The rod is 8 mm round with a thread at the top. The clamp holds the sheet with a rubber pad, so no crack forms. A fitter sets the plate into a ceiling grid with two screws. The panel swings a little, so a knock does no harm. Our cash counter takes the same plate.
| Specification | Detail |
|---|---|
| Width | 800 mm |
| Height | 600 mm |
| Sheet | 5 mm cast acrylic |
| Rod | 8 mm steel |
| Clamp | Two plates |
| Hang Gap | 400 mm |
| Weight | 5 kg |
Counter and Reception
A supermarket sets this safety partition over a till. A clinic sets one at a reception desk. A bank sets one at a teller window. A school sets one at a library counter. Sneeze guards of this build pair with a card stand. A counter with a 600 mm depth fits the panel with room to pass a bag. A store fixture set finishes the bay.
Build Notes
The sheet is cut on a saw with a slow feed, so the edge does not craze. A safety partition of this build keeps a clean edge after a move. The edge is flame polished by hand, then checked for a wave. The clamp plates are punched and coated before assembly. Each unit is checked for a level hang and a clear face before packing. Read our bench notes for the edge detail.
Sizes and Price
Width runs at 600, 800 or 1000 mm for this safety partition. Height runs at 500, 600 or 750 mm. Sheet runs at 4 or 5 mm. The hardware comes in a white or a black coat. A ceiling plate, a wall arm and a counter post are options. List price starts at USD 95 for the 800 mm unit. ukiosks builds this safety partition in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Double Bay Bronze Garment Rack, Wood Deck 2.2 m
Price:
Slimline Gold Garment Rack, Base Deck 1.2 m
Price:
Pedestal Glass Display Case, Gold Trim 1.4 m
Price:








Reviews
There are no reviews yet.