UniqueKiosk · Shenzhen workshop

Openwork Grid Panel Steel Display Rack White

$218.00

White steel display rack with a tall wire grid panel, a plain header plate and a low base tray. Price range: USD 218-320, set by panel height.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Grid Panel Face

A tall wire grid panel covers this display rack from the base tray to the header. The grid runs a 50 mm square, so a hook clips on at any point. A shop hangs small packs, clips or a short chain on the face. The open grid also lets a wall colour show through the top rows. This display rack stays light in a small bay. Display racks list this grid size.

grid panel display rack

Header Plate

A plain white header plate tops this display rack at 1750 mm. The plate takes a printed card, a vinyl cut or a hand written note. A shop swaps the card each season and keeps the frame. The header plate of this display rack also hides the top grid edge. The face reads clean from the aisle. Sign holders fit the same header.

display rack grid front

Base Tray

A low wire tray sits at the foot of this display rack. The tray runs 300 mm deep and takes a starter stack of stock. A shop keeps the popular size in the tray and the rest on the grid. The tray edge holds the panel square, so the unit stays upright on a level floor. Retail displays fixtures share this base tray.

display rack grid side

Shop Use

The display rack suits a small boutique, a pet shop or a stationery corner. One panel shows a whole clip range without a shelf build. A shop sets the unit near a door and keeps 700 mm clear in front. The angled struts also keep the rack steady when a shopper pulls a pack. Display shelves fit the same corner.

Load And Care

The grid takes 25 kg spread over the panel on this display rack, and the tray takes 15 kg. Keep the heavy packs low on the grid, since a hook load pulls on one wire. A loaded unit stays level within 3 mm across the tray. Check the strut bolts after a month, since a loose bolt lets the panel lean. Wipe the grid and keep the white coat dry. Read more about our bench on our grid panels.

display rack grid weld

Size Options

Panel width runs from 500 mm to 700 mm on request. Height runs at 1600 mm or 1750 mm. A shop can order a second tier or a small shelf plate on the grid. The frame comes in white, black or a satin grey. A castor set can replace the feet for a moving display. List price starts at USD 218 for the 600 mm unit. ukiosks builds this display rack in Shenzhen to order, so send your panel plan through contact us.

Specification Detail
Width 600 mm
Height 1750 mm
Depth 380 mm
Panel Wire grid, 50 mm square
Base Wire tray, 300 mm deep
Load 25 kg panel, 15 kg tray
Finish Satin white powder coat

Reviews

There are no reviews yet.

Be the first to review “Openwork Grid Panel Steel Display Rack White”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop