UniqueKiosk · Shenzhen workshop

Nova White Steel Wig Display Stand, 1800 mm

$65.00

Wig display stand in white steel with a silver pegboard panel, twelve pegs and a blank header. Price range: USD 65-160, set by height and peg count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Panel and Pegs

This wig display stand runs 1800 mm tall and 500 mm wide. A wig display stand of this height shows four long wigs in one column. The panel carries twelve black pegs on a silver grid, so a wig hangs by its lace edge. Rows sit at 300 mm, so a 700 mm wig clears the row below. A blank header of 300 mm takes a printed card. The base holds a tray for a care note. A store fixture plan sets the column.

Steel Build

The frame is 1.2 mm steel with a white powder coat. A wig display stand in this build keeps the panel flat under a long wig. The pegboard face bends at the side, so a corner reads clean. The pegs screw into the grid, so a peg takes a 2 kg wig. The base welds on a jig, so a stand sits square. A dry cloth clears a print from a coated face.

Salon Setup

A wig display stand of this build sets in about ten minutes with one tool. A staff stands the base, then sets the panel in the frame slot. The pegs fit any grid point. A staff sets a row for long wigs. A second row takes short cuts. A stand works alone or in a run of three. The base feet keep a stand steady on a tile floor. A stand fits a lift in one piece. Our store fixture crew packs this base.

Specification Detail
Height 1800 mm
Width 500 mm
Panel Silver pegboard
Pegs 12
Row step 300 mm
Steel 1.2 mm
Finish White

Store Use

A hair shop uses this wig display stand for a colour line. A salon uses one for a retail corner. A beauty store uses one for extensions. A trade show uses one at a booth. Retail displays of this build pair with a head form. A bay of 700 mm takes one stand with a clear walk. A countertop display holds the care cards.

Build Notes

The sheet cuts on a laser, then punches on a press for the peg grid. A wig display stand of this build keeps a straight panel after a move. The frame welds on a jig, so a corner reads tight. The coat bakes at 200 C, so a panel resists a comb knock. Each lot is checked for a level base and a firm peg before packing. Read our bench notes for the peg check.

Sizes and Price

Height runs at 1500, 1800 or 2000 mm for this wig display stand. The peg count runs at eight, twelve or sixteen. The finish comes white, black or rose gold. A shelf, a mirror strip and a wheel set are options. A printed header is an option too. List price starts at USD 65 for the 1800 mm stand. ukiosks builds this wig display stand in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Nova White Steel Wig Display Stand, 1800 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop