UniqueKiosk · Shenzhen workshop
Marigold Blue Steel Ball Display Rack with Four Tiers, 1450 mm
$240.00
Ball display rack in blue coated steel with four sloped tiers and caster feet. Price range: USD 240-520, set by width and tier count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Rack Layout
This ball display rack runs 1450 mm wide and 1000 mm tall. A ball display rack of this size sets a ball wall in a sports shop. Four tiers stack at 220 mm pitch, so a ball row reads clear. Each tier slopes back, so a ball stays in place. Tube rungs run across each tier, so a ball rests on a line. One rack holds 60 balls. A retail display plan sets the bay.
Steel and Coat
The frame builds from a 25 mm steel tube with a 1.2 mm wall. A ball display rack in this tube holds a full tier with no bow. The coat runs a blue polyester powder finish, so a rack reads bright. Tier bars weld on a jig, so a pitch stays at 220 mm. End plates carry the tube ends, so a frame reads square. A damp cloth keeps the coat clean.
Floor Set
A ball display rack of this build sets in about fifteen minutes. A staff unfolds the frame, then fits the four tiers. Bars clip on a pin, so a tier drops in. Casters run at the base, so a rack rolls over a shop floor. A brake locks each wheel, so a rack stays put in a run. Two racks fill a 3 m ball wall. Our store fixture crew checks the brakes.
| Specification | Detail |
|---|---|
| Width | 1450 mm |
| Height | 1000 mm |
| Tiers | 4 |
| Pitch | 220 mm |
| Tube | 25 mm |
| Coat | Blue |
| Holds | 60 balls |
Shop Use
A sports shop uses this ball display rack for a ball wall. A gym uses one for a loan ball set. A school store uses one for a PE bay. A club shop uses one for a team ball row. Retail shelving of this build fills a bay. A shop of 3 m wall takes two racks at this width. A shelving run joins the rack.
Build Notes
The tube cuts on a saw, then bends on a former. A ball display rack of this build keeps a true tier after a season. The frame welds on a fixture, so a joint reads square. The coat cures at 190 C, so a blue face reads even. Each lot is checked for a level tier and a free caster before packing. Read our bench notes for the load test.
Sizes and Price
Width runs at 1000, 1450 or 1800 mm for this ball display rack. Tier count runs at three to five. Height runs at 900 to 1200 mm. The coat comes blue, black or red. A wheel brake and a tier sign board are options. List price starts at USD 240 for the 1.45 m rack. ukiosks builds this ball display rack in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Slimline Gold Garment Rack, Base Deck 1.2 m
Price:
Pedestal Glass Display Case, Gold Trim 1.4 m
Price:
Freestanding Glass Display Case, Five Shelves 1.9 m
Price:








Reviews
There are no reviews yet.