UniqueKiosk · Shenzhen workshop

Freestanding Glass Display Case, Five Shelves 1.9 m

$1,240.00

A freestanding display case with two glass doors, five glass shelves and a lit interior. Two locked drawers hold back stock below. Price range: USD 1,050-1,400, set by shelf count and light kit.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two Doors Five Shelves

A freestanding display case stands on its own, with no wall fixing. Two full height glass doors open the whole front at once. Inside, five glass shelves set the display rhythm. The unit runs 1.9 m tall and 900 mm wide, so it fits a narrow aisle. Staff reach every shelf from one spot. A display case of this format suits shops that change stock often. It also keeps the floor plan flexible. A retail display case of this depth fits a 1 m aisle.

White Steel Body

The body is 1.0 mm cold rolled steel with a white powder coat. Rails weld and grind flat, so no joint shows at the corners. A display case needs a stiff body, because the glass doors hang on the front. Door tracks run top and bottom on aluminium rails. Doors glide on nylon rollers and close with a soft stop. The plinth adds 120 mm and hides the levelling feet. Coat thickness holds at 60 microns after the second pass.

Specification Detail
Size 900 x 450 x 1900 mm
Body 1.0 mm steel, white powder coat
Shelves Five glass shelves, 8 mm
Doors Two full height glass doors
Lighting Six LED modules, 3000 K
Base Two locked drawers, 250 mm deep
Load 20 kg per shelf, 25 kg per drawer

Light Bar and Shelves

A light bar sits in the top housing, above the first shelf. Six LED modules run at 3000 K and throw warm light down the case. A display case with lit stock reads sharp from two metres away. Each shelf takes 20 kg of boxed goods. Shelf pitch moves in 32 mm steps, so a tall item still fits. Glass shelves are 8 mm with polished edges. They lift out for cleaning or a range reset. Shelves match our glass display case stock.

Drawers and Locks

The base holds two drawers, each 250 mm deep. Drawers run on steel ball slides and lock with one key. A display case often hides restock here, out of shopper view. Each drawer carries 25 kg of boxed stock. The same key locks the glass doors, so one turn closes the whole unit. Hinges and slides are rated for daily use over years. Drawer fronts carry no handle, which keeps the front line clean. Slides come from the fixture hardware range.

Where It Fits

Small electronics shops use one case per brand. Watch rooms place two side by side. A display case like this also fits a pharmacy or a gift shop. The 900 mm width keeps a stock aisle at one metre. Our display cases range covers wall mounted formats. Add a countertop display for impulse lines. A case at this height also works in a small duty free bay.

Five Rows Under Light

Five lit shelves show a full range in one narrow footprint. White steel keeps the case light against a plain wall. One key closes doors and drawers alike. A display case of this build also ships upright, so it needs no crate handling on site. Drawer slides take daily use without sag. List price starts at USD 1,240 for the 1.9 m unit. ukiosks can change shelf count, light colour and body finish. Send your stock list to our team and we will quote a layout.

Reviews

There are no reviews yet.

Be the first to review “Freestanding Glass Display Case, Five Shelves 1.9 m”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop