Avada Car Dealer News

Two plates, one queue

A crepe kiosk in a mall runs on two plates. Each plate makes a crepe in 90 seconds, and 90 seconds is the whole service promise on the menu board. Most of these gaps appear in week one, which is exactly when the first queue forms. Mark it on the drawing sheet too, so whoever services the plate later has the reference without guessing.

Two plates at 90 seconds serve 50 counters and towers with one person on the plate and one on the till. Two plates and one person serve 25, and 25 is glass showcases. One lunch hour with a stopwatch settles the question faster than a week of drawing revisions. None of that shows in a render, which is why we mark the plate bay and the fill case on the plan.

The plate bay

A crepe plate is 400 mm across and needs 500 mm of clear counter on each side. Plan a 1.5 m bay per two plates with a batter tub at 200 mm and a spreader at arm height. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a rebuild.

A plate at 850 mm puts the wrist at a bad angle after 200 crepes. A plate at 900 mm with a 100 mm front lip keeps the arm level and the batter kiosk design. The same rule holds for a mall bay and a food court unit, with the hood mattering more inside a mall. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference.

food kiosk

Keep the batter tub at 400 mm depth and 4 C. A tub at room temperature ferments in 3 hours, and a fermented batter tears on the plate at the refrigerated cases. That number belongs on the kiosk drawing, because a plate height agreed verbally rarely survives the first lunch. Most of these gaps appear in week one, which is exactly when the first queue forms.

wood crepe kiosk

Gas, hood and the mall

A crepe plate runs on gas or electric. Gas needs a hood and a grease filter, and most malls refuse an open flame inside a kiosk bay, so electric is the safer route. Mark it on the drawing sheet too, so whoever services the plate later has the reference without guessing. One lunch hour with a stopwatch settles the question faster than a week of drawing revisions.

An electric plate at 2.2 kW per unit draws 4.4 kW for two, plus a fridge at 0.6 kW and light at 0.3 kW. Plan a 32 A supply and a dedicated circuit for the plates. None of that shows in a render, which is why we mark the plate bay and the fill case on the plan.

The fill display

The fill display is a refrigerated case at 4 C, 1200 mm wide, with 8 pans visible from the queue. A closed case hides the strawberry and the banana, and the fill is fixture materials. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a rebuild. The same rule holds for a mall bay and a food court unit, with the hood mattering more inside a mall.

Keep the case 200 mm below the plate bay. A case at plate height puts the cold pan above the hot plate, and the cold pan warms to 10 C in an hour at peak. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference. That number belongs on the kiosk drawing, because a plate height agreed verbally rarely survives the first lunch.

twin tone crepe kiosk

Menu board and the fold

A crepe menu board holds 8 lines at 1800 to 2100 mm. More than 8 lines slows the order by 15 seconds, and 15 seconds at 50 orders an hour is 12 minutes of queue. Most of these gaps appear in week one, which is exactly when the first queue forms. Mark it on the drawing sheet too, so whoever services the plate later has the reference without guessing.

Show the fold, not just the name. A board with a folded crepe photo sells the sweet line faster than a board with 12 names and retail displays. One lunch hour with a stopwatch settles the question faster than a week of drawing revisions. None of that shows in a render, which is why we mark the plate bay and the fill case on the plan.

Six square metres, two staff

A crepe kiosk fits in 6 sqm: 1.5 m plate bay, 1.2 m fill case, 0.9 m till, 0.6 m aisle. That kit serves 50 crepes an hour with two staff and one queue. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a rebuild. The same rule holds for a mall bay and a food court unit, with the hood mattering more inside a mall.

A 4 sqm kiosk forces the fill case behind the plate, and a staff member turning for every fill adds 8 seconds per crepe. Eight seconds is 7 fewer crepes an hour. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference. That number belongs on the kiosk drawing, because a plate height agreed verbally rarely survives the first lunch.

drink kiosk

Site a drink unit within 1 m of the till. A crepe sells with a drink 6 times in 10, and a drink unit at the far end of the kiosk loses that cash counters. Most of these gaps appear in week one, which is exactly when the first queue forms. Mark it on the drawing sheet too, so whoever services the plate later has the reference without guessing.

yellow crepe kiosk

The morning and the evening

A mall crepe kiosk trades in two peaks: 11 am to 2 pm for lunch and 4 to 7 pm for the school and office walk home. The morning is prep, not sales. One lunch hour with a stopwatch settles the question faster than a week of drawing revisions. None of that shows in a render, which is why we mark the plate bay and the fill case on the plan.

Prep 120 crepes worth of batter before 11 am and hold it at 4 C. A kiosk that mixes batter at noon stops the queue for 4 minutes, and 4 minutes at peak is a shop fixtures. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a rebuild.

Six numbers for a mall crepe kiosk

The table below is the kit we quote for a mall crepe bay, and each line is a decision the buyer makes once. The same rule holds for a mall bay and a food court unit, with the hood mattering more inside a mall. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference.

Item Number
Plates 2 at 400 mm
Plate bay 1.5 m at 900 mm
Service time 90 seconds per crepe
Output 50 an hour, 2 staff
Fill case 1200 mm at 4 C
Power 4.4 kW plates, 32 A supply
mini crepe booth

Cost and the payback line

A 6 sqm crepe kiosk fit out runs 12 to 20 thousand depending on the plates and the case. A crepe at 6 with a 30 percent food cost returns 4.2 per unit before rent and staff. That number belongs on the kiosk drawing, because a plate height agreed verbally rarely survives the first lunch. Most of these gaps appear in week one, which is exactly when the first queue forms.

At 300 crepes a week the kiosk returns 1260 a week. A mall rent of 400 a week and two staff at 900 leaves a thin margin, so 300 a week is the floor, not the target. Mark it on the drawing sheet too, so whoever services the plate later has the reference without guessing. One lunch hour with a stopwatch settles the question faster than a week of drawing revisions.

Conclusion

Two plates, a 1.5 m bay, a cold fill case at eye level and a 6 sqm footprint. Those four make a crepe kiosk a business instead of a stall. None of that shows in a render, which is why we mark the plate bay and the fill case on the plan. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a rebuild.

Sell the fill and the fold. A customer buys the strawberry and the folded crepe in the window, and the plate behind it only has to keep up. The same rule holds for a mall bay and a food court unit, with the hood mattering more inside a mall. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference.

fixture depth

Depth the plate bay at 700 mm and the fill case at 600 mm. A 500 mm bay puts the batter tub on the floor line, and a tub on the floor is a back injury in the display cases. That number belongs on the kiosk drawing, because a plate height agreed verbally rarely survives the first lunch.

Leave A Comment