
What buyers actually ask
Canadian candy buyers ask three things before they sign a fixture order: will the bins hold in dry winter air, how heavy is the cabinet, and who ships the crate. Most of these gaps appear in the first winter, which is exactly when the candy hardens. Mark it on the drawing sheet too, so whoever reorders lids later has the reference without guessing.
Nobody asks about colour first. Colour comes after the load, the weight and the delivery, and a supplier who leads with colour loses the technical buyer in the first email. One January in a dry shop settles the question faster than a week of emails. None of that shows in a render, which is why we mark the crate size and the cabinet weight on the plan.
One: the bin seal in dry air
Interior humidity in a Canadian winter drops under 30 percent, and a loose lid bin loses its candy to hardening in six weeks. Seal quality is the first complaint we see. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a claim. The same rule holds for a mall shop and a street shop, with the dock height mattering more in a mall.
A bin with a 2 mm silicone gasket and a snap lid holds a gummy for four months. A bin with a 1 mm gasket and a loose lid holds it for six, and the difference is 300 in glass showcases. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference.
Ask for a gasket sample before the bulk order. A sample costs nothing and shows whether the lid closes flat, and a lid that does not close flat is a lid that does not seal. That number belongs on the fixture drawing, because a gasket spec agreed verbally rarely survives the first January. Most of these gaps appear in the first winter, which is exactly when the candy hardens.

Two: the weight per metre
A 1.2 m wooden bin cabinet weighs 90 to 120 kg, and a steel frame version weighs 60 to 75 kg. Mall floors usually take 300 kg per sqm, so both pass, but delivery cost follows weight. Mark it on the drawing sheet too, so whoever reorders lids later has the reference without guessing. One January in a dry shop settles the question faster than a week of emails.
Weight also decides the move. A shop that refits twice in five years wants 75 kg units, and a shop that never moves can take the heavier timber and the kiosk design. None of that shows in a render, which is why we mark the crate size and the cabinet weight on the plan. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a claim.
Three: the crate and the door
Canada imports most fixtures, so the crate matters more than the finish. A 1.2 m cabinet ships in a 1300 by 700 by 1100 mm crate at 140 kg gross, and a mall dock refuses anything over 200 kg. The same rule holds for a mall shop and a street shop, with the dock height mattering more in a mall. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference.
Ask for a lift gate and a residential delivery option. A crate that arrives on a 40 ft trailer with no lift gate sits at the dock, and a sitting crate costs a shop fixtures. That number belongs on the fixture drawing, because a gasket spec agreed verbally rarely survives the first January. Most of these gaps appear in the first winter, which is exactly when the candy hardens.
Plan the bin depth at 350 mm and the cabinet at 600 mm. A 350 mm bin takes a 92 mm scoop and a 500 mm reach, and a scoop that cannot reach the back leaves the last 2 kg retail displays. Mark it on the drawing sheet too, so whoever reorders lids later has the reference without guessing.
Four: the wipe test
Candy shops wipe every bin every morning. A laminate at 0.8 mm takes 5000 wipes, and a veneer at 0.6 mm takes 2000 before the grain lifts at the edge. One January in a dry shop settles the question faster than a week of emails. None of that shows in a render, which is why we mark the crate size and the cabinet weight on the plan.
Buyers ask for a wipe test on a sample panel. A panel wiped 100 times with a damp cloth shows the edge lift in ten minutes, and that ten minutes saves a claim in cash counters. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a claim.
Five: the bilingual card slot
Every bin needs a 100 by 150 mm card slot for English and French. A slot at 100 mm width takes the standard card, and a 90 mm slot clips the last letter of a French name. The same rule holds for a mall shop and a street shop, with the dock height mattering more in a mall. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference.
Plan the slot at the bin front, not the shelf edge. A card at the shelf edge sits above the candy and reads at 400 mm, and a card at the bin front reads at 600 mm where the tobacco shop. That number belongs on the fixture drawing, because a gasket spec agreed verbally rarely survives the first January.

Six: spare parts and the season
Buyers ask what breaks first. The answer is the lid hinge and the card slot, and both should ship as spare parts in the first order. Most of these gaps appear in the first winter, which is exactly when the candy hardens. Mark it on the drawing sheet too, so whoever reorders lids later has the reference without guessing.
Send 5 percent spare lids with the order. A shop with 40 bins needs 2 spare lids, and a spare lid costs 8 while a lost bin in December costs a display cases. One January in a dry shop settles the question faster than a week of emails. None of that shows in a render, which is why we mark the crate size and the cabinet weight on the plan.
What the feedback changed
The table below lists the six feedback themes we hear most and the design change each one produced, in the order buyers raise them. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a claim. The same rule holds for a mall shop and a street shop, with the dock height mattering more in a mall.
| Feedback | Change |
|---|---|
| Candy hardens in winter | 2 mm gasket, snap lid |
| Cabinet too heavy to move | Steel frame at 75 kg |
| Crate stuck at the dock | Lift gate, under 200 kg |
| Edge lift after wiping | 0.8 mm laminate, sealed edge |
| French card clipped | 110 mm card slot |
| No spare lids | 5 percent spare in first order |

Delivery timing in Canada
A fixture order from Asia to a Canadian mall runs 45 to 60 days by sea plus 7 to 10 days inland. Order in August for an October open, and order in March for a May open. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference. That number belongs on the fixture drawing, because a gasket spec agreed verbally rarely survives the first January.
Add a 10 day buffer for customs. A crate held at customs for a week is normal, and a shop that books installers before clearance pays for idle labour. Most of these gaps appear in the first winter, which is exactly when the candy hardens. Mark it on the drawing sheet too, so whoever reorders lids later has the reference without guessing.

Conclusion
Six feedback themes, six design changes. Seal, weight, crate, wipe, card slot and spares, in that order, and a Canadian candy shop opens without a claim. One January in a dry shop settles the question faster than a week of emails. None of that shows in a render, which is why we mark the crate size and the cabinet weight on the plan.
Buyers judge a fixture by what breaks in January, not by what looks good in a render. Design for the dry month and the rest of the year follows. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a claim. The same rule holds for a mall shop and a street shop, with the dock height mattering more in a mall.
Keep the bin front at 1000 mm and the cabinet top at 1200 mm. A bin front at 900 mm makes an adult bend for every scoop, and a bend per scoop slows a counters and towers. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference. That number belongs on the fixture drawing, because a gasket spec agreed verbally rarely survives the first January.
