Avada Car Dealer News

A shop fitter sees the change first

Walk into a shop that sells e-cigarettes and one thing stands out: the stock moved behind the counter. Ten years ago the cartons sat on open shelves, and today they sit in glass at arm reach. None of that shows in a render, which is why we mark the check zone and the queue lane on the plan. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a rebuild.

That move drives every fixture decision in the category. The counter grew, the wall lost its self-service shelves, and the display case took over the job the shelf used to do. The same rule holds for an age restricted shop and a general store, with the lock mattering more here. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference.

Behind the counter, not in front

Cigarette stock now sells from a gantry behind the counter at 1000 to 1200 mm, with the top row at 1500 mm. A gantry above 1600 mm makes staff reach over a queue, and a gantry below 900 mm makes them bend. That number belongs on the shop drawing, because a counter height agreed verbally rarely survives the first audit.

Vape stock sells from a glass counter at 950 mm with two tiers. Tier depth at 300 mm keeps a box readable, and a 400 mm tier hides the second row from a standing customer. Most of these gaps appear in week one, which is exactly when the first compliance visit lands. Mark it on the drawing sheet too, so whoever refits the counter later has the reference without guessing.

display cases

Use laminated glass on the front of a vape case. A tempered front at 8 mm breaks into cubes on impact, and a laminated front holds the pieces in place until staff glass showcases. One audit walk with a tape measure settles the question faster than a week of drawing revisions. None of that shows in a render, which is why we mark the check zone and the queue lane on the plan.

What the wall still does

The wall keeps the volume, the counter keeps the value. A 3 m wall with 12 shelves at 200 mm pitch holds around 400 SKUs, and the same stock in a counter would need three cases. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a rebuild. The same rule holds for an age restricted shop and a general store, with the lock mattering more here.

Set the wall pitch at 200 mm for boxed liquid and 150 mm for disposables. A wall at one pitch forces the small items into a gap, and a gap in a stock wall reads as a display cases. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference.

slat counter

Lock, key and count

Age restricted stock needs a lock, and the lock belongs on the staff side of the counter. A case that locks on the customer side invites a handle test, and a tested handle gets left open. That number belongs on the shop drawing, because a counter height agreed verbally rarely survives the first audit. Most of these gaps appear in week one, which is exactly when the first compliance visit lands.

Count the trays weekly, not the units. A tray of 20 boxes counts in a minute, and a unit count takes an hour and finds the same gap. Mark it on the drawing sheet too, so whoever refits the counter later has the reference without guessing. One audit walk with a tape measure settles the question faster than a week of drawing revisions.

cash counters

Keep the cash counter separate from the stock counter. A till on the display case means every sale opens the case, and a case opened 60 times a day loses its lock cylinder fixture materials. None of that shows in a render, which is why we mark the check zone and the queue lane on the plan.

Light and the neon look

Modern vape retail uses colour light as decoration, and that light sits at the wall, not over the stock. A purple wash at 150 lux reads as brand, and the same wash over a counter makes every box look the same colour. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a rebuild.

Light the counter at 500 lux at 4000 K with a CRI above 90, and keep the coloured accent on the wall behind. Two colour temperatures in one frame is kiosk design. The same rule holds for an age restricted shop and a general store, with the lock mattering more here. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference.

slat wall cases

Display numbers by shop size

The table below is what we plan for an age restricted shop, and it holds when the counter sits at the entrance. That number belongs on the shop drawing, because a counter height agreed verbally rarely survives the first audit. Most of these gaps appear in week one, which is exactly when the first compliance visit lands. Mark it on the drawing sheet too, so whoever refits the counter later has the reference without guessing.

Shop Wall SKUs Counter cases
25 sqm 200 1
40 sqm 350 2
60 sqm 500 3
90 sqm 800 4

Counter height and the queue

A shop that checks identity at the counter needs 300 mm of clear top for the check and a reader facing the customer. That top is separate from the display glass, and a case that doubles as a check desk slows every sale. One audit walk with a tape measure settles the question faster than a week of drawing revisions.

Keep 1.2 m of queue lane in front of the counter. A lane under 900 mm puts a customer against the wall, and a customer against the wall steps out of the queue to let others cash counters. None of that shows in a render, which is why we mark the check zone and the queue lane on the plan.

minimal counters

Fit out, then restock

A new shop fits out once and restocks every week, so the fixtures matter more than the first order. A case that holds 60 boxes at 300 mm tier depth restocks in ten minutes. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a rebuild. The same rule holds for an age restricted shop and a general store, with the lock mattering more here.

Plan one drawer for overstock under the counter at 500 mm depth. A shop without one keeps cartons on the floor behind the till, and cartons on the floor fail counters and towers. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference. That number belongs on the shop drawing, because a counter height agreed verbally rarely survives the first audit.

fixture depth

Depth the counter at 600 mm. A 600 mm top takes a case tier and a card reader, and a 450 mm top leaves the reader hanging over the customer side. Most of these gaps appear in week one, which is exactly when the first compliance visit lands. Mark it on the drawing sheet too, so whoever refits the counter later has the reference without guessing.

lit wood table

Conclusion

Age restricted stock moved behind glass, and the fixtures followed. Counter at 950 mm, two tiers at 300 mm, gantry behind at 1000 to 1200 mm, and a lock on the staff side. One audit walk with a tape measure settles the question faster than a week of drawing revisions. None of that shows in a render, which is why we mark the check zone and the queue lane on the plan.

Plan for the check, not for the display alone. A shop that fits the check into the counter sells faster than one that fits the stock into the window. Clients who settle it at design stage pay nothing extra, and clients who settle it after opening pay for a rebuild. The same rule holds for an age restricted shop and a general store, with the lock mattering more here.

fixture materials

Finish the counter in a material that wipes. A matte laminate at 950 mm takes a sanitiser wipe without marking, and a gloss finish shows every handprint retail displays. We keep the alternative on the same quotation, so the buyer compares a number instead of a preference. That number belongs on the shop drawing, because a counter height agreed verbally rarely survives the first audit.

Leave A Comment