
10 by 10 ft is 9 sqm
A 10 by 10 ft kiosk is 3 by 3 m, and 9 sqm is the smallest bay that holds 3 cases and a till. A 9 sqm kiosk with 2 cases leaves 3 sqm for nothing. None of that shows in a render, which is why we mark the case height and the aisle on the plan.
A US mall packages the bay in feet and the fit out in millimetres. Convert once at the start, because a 3.05 m case in a 3.00 m bay is a 50 mm gap fixture materials. Owners who settle it at design stage pay nothing extra, and owners who settle it after opening pay for a re case.
The wooden shell
A wooden kiosk is a case decision as much as a look. A 40 mm oak face on a 18 mm ply core holds a 900 mm run, and a 18 mm face alone warps in a year. The same rule holds for an Atlanta mall and a Midwest mall, with the fire rating mattering in both. We keep the alternative on the same quotation, so the owner compares a number instead of a finish.
Finish with a matte 5 degree lacquer. A gloss at 30 degree shows every fingerprint at 900 mm, and a jewellery kiosk retail displays. That number belongs on the kiosk plan, because a case run agreed verbally rarely survives the first mall survey. Most of these gaps appear in the first December, which is exactly when the kiosk is busiest.
3 cases and the 1 till
A 9 sqm kiosk carries 3 cases: a 1.8 m long case, a 1.2 m corner case and a 600 mm till case. Three is the number that lets 2 staff serve 4 customers. Mark it on the drawing sheet too, so whoever adds a fourth case later has the reference without guessing. One Saturday of trade settles the question faster than a week of drawing revisions.
A fourth case at 9 sqm means a 500 mm aisle. A 500 mm aisle is a customer turning sideways, and a sideways turn at a glass case is a handbag kiosk design. None of that shows in a render, which is why we mark the case height and the aisle on the plan. Owners who settle it at design stage pay nothing extra, and owners who settle it after opening pay for a re case.
Glass at 6 mm tempered, not 5 mm annealed. A 6 mm tempered top takes a watch dropped from 200 mm, and a 5 mm annealed top takes a chip counters and towers. The same rule holds for an Atlanta mall and a Midwest mall, with the fire rating mattering in both. We keep the alternative on the same quotation, so the owner compares a number instead of a finish.

Light at 3000 K and 90 CRI
A diamond sells on the sparkle, and the sparkle needs a 90 CRI source. A 3000 K at 90 CRI makes a diamond read white, and an 80 CRI makes it read grey. That number belongs on the kiosk plan, because a case run agreed verbally rarely survives the first mall survey. Most of these gaps appear in the first December, which is exactly when the kiosk is busiest.
Two spots per case run, 30 degree beam, at 400 mm above the glass. A 60 degree flood washes the case and kills the facet, and a facet is the jewellery cases. Mark it on the drawing sheet too, so whoever adds a fourth case later has the reference without guessing. One Saturday of trade settles the question faster than a week of drawing revisions.
The floor-in and the plinth
A kiosk with a floor in has a 100 mm plinth on all sides. A plinth at 40 mm lets a pallet truck under and a plinth at 100 mm stops it, and a stop is a delivery shop fixtures. None of that shows in a render, which is why we mark the case height and the aisle on the plan.
A 100 mm plinth hides a cable and a levelling screw. A mall floor at a 1 percent fall needs 4 screws per 3 m, and a screw inside a plinth is adjusted in 5 minutes. Owners who settle it at design stage pay nothing extra, and owners who settle it after opening pay for a re case.
Security: 3 layers
A jewellery kiosk runs 3 layers: a lockable case, a cable on the tray and a camera on the till. A missing layer is a tray walk at 3 pm on a Saturday. The same rule holds for an Atlanta mall and a Midwest mall, with the fire rating mattering in both. We keep the alternative on the same quotation, so the owner compares a number instead of a finish.
Lock every case at close, not at night. A case left open during a stock change is the 4 minute window a tray disappears in, and a tray is 40 percent cosmetic kiosk. That number belongs on the kiosk plan, because a case run agreed verbally rarely survives the first mall survey. Most of these gaps appear in the first December, which is exactly when the kiosk is busiest.

Seven numbers for a 10 by 10 ft kiosk
The table is the shape we quote for a US mall jewellery kiosk at 10 by 10 ft, and each line answers a case or a camera rather than cash counters. Mark it on the drawing sheet too, so whoever adds a fourth case later has the reference without guessing. One Saturday of trade settles the question faster than a week of drawing revisions.
| Item | Number |
|---|---|
| Footprint | 10 by 10 ft, 9 sqm |
| Cases | 3 at 1.8, 1.2 and 0.6 m |
| Case height | 900 mm plus 150 mm glass |
| Glass | 6 mm tempered |
| Light | 3000 K, 90 CRI |
| Plinth | 100 mm with 4 screws |
| Aisle | 900 mm inside the bay |

Atlanta and the mall rules
A US mall in Atlanta asks for a certificate of insurance and a fire rating on the panel. A panel without a rating is a kiosk display cases on jewelry kiosk. None of that shows in a render, which is why we mark the case height and the aisle on the plan. Owners who settle it at design stage pay nothing extra, and owners who settle it after opening pay for a re case.
A fire rating on the ply core runs class B or class A. Class A costs 15 percent more and passes every mall, and class B passes 70 percent and fails the rest. The same rule holds for an Atlanta mall and a Midwest mall, with the fire rating mattering in both. We keep the alternative on the same quotation, so the owner compares a number instead of a finish.
The 4 customer hour
A jewellery kiosk peaks 12 to 3 and 5 to 8 with 4 customers per hour. A kiosk built for 4 at 2 staff sells 1 in 3, and 1 in 3 at 200 dollars is 260 dollars an hour. That number belongs on the kiosk plan, because a case run agreed verbally rarely survives the first mall survey. Most of these gaps appear in the first December, which is exactly when the kiosk is busiest.
Keep the till case facing the peak flow. A till at the back makes a customer walk 3 m past 2 cases, and a walk past 2 cases is a second look that closes. Mark it on the drawing sheet too, so whoever adds a fourth case later has the reference without guessing. One Saturday of trade settles the question faster than a week of drawing revisions.

Conclusion
A 9 sqm bay, 3 cases, 900 mm case height, 6 mm tempered glass, 3000 K at 90 CRI, a 100 mm plinth and a 900 mm aisle. Those seven hold a 10 by 10 ft kiosk. None of that shows in a render, which is why we mark the case height and the aisle on the plan.
Wood sells the brand and glass sells the stone. Get the case height and the light right, and the wood only has to stay out of the way. Owners who settle it at design stage pay nothing extra, and owners who settle it after opening pay for a re case. The same rule holds for an Atlanta mall and a Midwest mall, with the fire rating mattering in both.
Depth the case at 450 mm and the till counter at 600 mm. A 350 mm case cannot take a tray and a price card, and a card on a tray hides the piece it prices. We keep the alternative on the same quotation, so the owner compares a number instead of a finish. That number belongs on the kiosk plan, because a case run agreed verbally rarely survives the first mall survey.
