
Light decides the room
A high end jewelry interior is decided by lux and colour rendering, not by a marble reference. A 300 lux ambient at 4000 K and a 750 lux counter at CRI 90 make a 0.9 carat stone read as white display cases. That number belongs on the shop sheet, because a case count agreed verbally rarely survives a first Saturday.
A 120 sqm shop at 300 lux needs 36,000 lumens, which is 24 fixtures at 1,500 lumens. A CRI 90 fixture costs 210 dollars and a CRI 80 120, and 90 more per fixture on 24 is 2,160 dollars for a stone that reads true. Most of these gaps appear at the first weekend rush, which is exactly when 20 cases run at full display.
Four zones in 120 sqm
A 120 sqm jewelry shop splits into a 20 sqm window, a 50 sqm wall case run, a 30 sqm island zone and a 20 sqm lounge. Four zones stop a customer walking a single aisle and leaving in 40 seconds. Mark it on the sheet too, so whoever fits the next shop has the reference without guessing. One site visit settles the question faster than a week of render browsing.
A wall run of 50 sqm holds 12 cases at 1.2 m and an island zone holds 8 at 1.5 m, which is 20 cases and a 300 piece display. Twenty cases on 120 sqm is 0.17 cases per sqm, and a 0.22 density retail displays. None of that shows in a picture, which is why we mark the lux and the glass on the sheet.

Six millimetre glass, not 8
A jewelry case uses 6 mm tempered glass on a 1.2 m span and 8 mm only above 1.6 m, and 6 mm carries a 40 kg shelf load. Eight millimetre adds 90 dollars a case and 30 percent weight for no gain. Owners who settle it before an order pay nothing extra, and owners who settle it after a fit-out pay a rebuild.
Six millimetre glass at 120 dollars a sqm against 8 mm at 190, and 20 cases at 1.4 sqm is 28 sqm. Seventy dollars a sqm on 28 is 1,960 dollars saved, which is a month of fixture materials. The same rule holds for a Shenzhen showroom and a Dubai one, with the light mattering in both.

Four numbers on the sheet
The table is the sheet we use on jewelry interiors, and each line answers a lux, a case or a dollar rather than a mood board. We keep the alternative on the same sheet, so the owner compares a lux figure instead of a render. That number belongs on the shop sheet, because a case count agreed verbally rarely survives a first Saturday.
| Item | Number |
|---|---|
| Floor area | 120 sqm |
| Ambient / counter | 300 / 750 lux |
| Case glass | 6 mm |
| Cases | 20 |
| Fit-out | $186,000 |
The 20 sqm window
A jewelry window earns its 20 sqm when a passer-by stops for 12 seconds, and 12 seconds is one necklace at eye level and one price card. A window at 2.4 m height reads at 8 m and one at 1.8 m reads glass showcases. Most of these gaps appear at the first weekend rush, which is exactly when 20 cases run at full display.
A 2.4 m window wall costs 9,600 dollars and a 1.8 m 6,400, and 3,200 buys 3 m of reach. Three metres at 8 m of passing traffic is 40 more pairs of eyes a minute in a busy mall. Mark it on the sheet too, so whoever fits the next shop has the reference without guessing. One site visit settles the question faster than a week of render browsing.
Marble at 18 mm
A jewelry island counter top uses 18 mm marble on a 40 mm honeycomb core, and an 18 mm slab at 1.5 m span holds 60 kg without a mid support. A 12 mm slab needs a steel frame every 900 mm. None of that shows in a picture, which is why we mark the lux and the glass on the sheet.
An 18 mm marble slab costs 320 dollars a sqm and a 12 mm with frame 380, and 8 sqm of island top is 2,560 against 3,040. An 18 mm slab is cheaper because it cash counters. Owners who settle it before an order pay nothing extra, and owners who settle it after a fit-out pay a rebuild. The same rule holds for a Shenzhen showroom and a Dubai one, with the light mattering in both.

Sixteen drawers per island
A jewelry island holds 16 drawers at 400 mm wide, and 16 drawers cover a 300 piece inventory across 4 islands. Eight drawers forces a stock run from the back room every 30 minutes. We keep the alternative on the same sheet, so the owner compares a lux figure instead of a render. That number belongs on the shop sheet, because a case count agreed verbally rarely survives a first Saturday.
A 16 drawer pedestal costs 1,450 dollars and an 8 drawer 980, and 470 buys 8 drawers and 1 fewer walk per hour. A walk costs 90 seconds and 12 walks a day is 18 minutes counters and towers. Most of these gaps appear at the first weekend rush, which is exactly when 20 cases run at full display.

Conclusion
One hundred and twenty square metres, 4 zones, 300 lux, 6 mm glass and 186,000 dollars. Five numbers shop fixtures. Mark it on the sheet too, so whoever fits the next shop has the reference without guessing. One site visit settles the question faster than a week of render browsing. None of that shows in a picture, which is why we mark the lux and the glass on the sheet.
Buy CRI 90 light and the 2.4 m window wall. Ninety CRI keeps a stone white and a 2.4 m wall adds 3 m of reach kiosk design. Owners who settle it before an order pay nothing extra, and owners who settle it after a fit-out pay a rebuild. The same rule holds for a Shenzhen showroom and a Dubai one, with the light mattering in both.
Check a case at 750 lux and a slab at 18 mm. Seven hundred and fifty lux shows a setting and an 18 mm slab spans 1.5 m without a steel frame. We keep the alternative on the same sheet, so the owner compares a lux figure instead of a render. That number belongs on the shop sheet, because a case count agreed verbally rarely survives a first Saturday.
