UniqueKiosk · Shenzhen workshop

Wren Oak and Steel Wine Display Cabinet, Three Bay

$1,480.00

Wine display cabinet in light oak with a steel frame, three bays, shelf band and lattice rack. Price range: USD 1,480-2,900, set by bay count and height.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Bay Layout

This wine display cabinet runs three bays at 900 mm each. Each bay carries four open shelves and one shelf band set at an angle. A wine display cabinet of this layout shows a bottle face out and a second row behind. The top band holds eight cube cells for a single bottle each. A shop flags a new vintage in the cube row, where a label reads at eye height. The bottom bay carries a diamond lattice for bottles laid flat. Custom wine cabinets list this bay width.

Oak and Steel

Shelves are 25 mm light oak board with a melamine face. The frame is a 30 mm steel tube in matte dark grey. A wine display cabinet with this frame keeps a straight line over a long run. Each shelf takes a 60 kg load across the span with no bow. The oak face carries a clear matte coat, so a red bottle ring lifts with a cloth. Steel joints bolt at the corner and take a second bay later.

Wall Run

A shop sets this wine display cabinet against a wall and leaves the floor clear. The base sits on a plinth at 60 mm, so a mop does not reach the oak. A wine display cabinet at 2400 mm wide fits a standard store bay. The height runs 2100 mm and clears a low ceiling light. Two units join with a shared upright, so a run grows to six bays. A shop checks the wall line first, since the run reads better when straight. Wooden racks use this plinth detail. Our store display shelves share this shelf pin.

Specification Detail
Bays Three, 900 mm each
Width 2400 mm
Height 2100 mm
Depth 450 mm
Shelves Four open plus one band
Frame 30 mm steel tube
Shelf Load 60 kg

Shop Use

Bottle shops use this wine display cabinet for a region section. A restaurant sets one bay for red and one for white. A duty free store groups gift boxes on the middle shelves. A tasting room puts the lattice at the end for stock. Retail store display racks pair with this height. A shop with a narrow aisle likes the 450 mm depth, since a customer passes with a basket.

Build Notes

The oak board is a block core with a melamine face and a matching edge band. Each shelf takes a steel pin at both ends, so the load sits on the frame and not the panel. A wine display cabinet of this build ships as three crates and joins on site. Assembly takes two people and about ninety minutes. The lattice is a slot cut panel with a 95 mm pitch for a standard bottle. Read our bench notes for the frame detail.

Sizes and Price

Bay count runs at two, three or four. Width runs at 1800, 2400 or 3000 mm for this wine display cabinet. Height runs at 2100 mm or 2400 mm. Depth runs at 450 mm. The oak face comes in light oak, walnut or a grey wash. A light bar, a glass top and a lockable base are options. A shop can also order a version with a tasting ledge. List price starts at USD 1,480 for the three bay unit. ukiosks builds this wine display cabinet in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Wren Oak and Steel Wine Display Cabinet, Three Bay”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop