UniqueKiosk · Shenzhen workshop
Wooden Juice Bar Kiosk With Blender Row and Fruit Cabinet
$12,500.00
Wood grain juice bar kiosk with a four-blender row, stainless work top, glass fruit cabinet and glass guards, sized 3.6 x 1.8 m for mall and food hall counters. Price range: USD 9,000-15,000, set by size and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Wood Block Panel Base
Wood block panels give this unit its front face, a common pick for food and drinks zones. The pattern uses a light oak laminate over 18 mm MDF. Panels are cut in one run, so joints line up across sections. White tops sit above the panels with a 20 mm edge. Glass guards stand on the rear and side counters. A grey aluminium plinth takes the floor contact. The toe line keeps water away from the panel base. This juice kiosk reads calm next to dark mall floors. Wood fronts suit a juice kiosk with a low ceiling too.
Blender Row and Prep
Four blenders stand on the left counter, each on its own base plate. The row sits 700 mm back from the front edge. A free work strip of 400 mm runs in front of the blenders. Below the top, two drawers take blades, cups and cloths. A stainless sink and tap sit at the centre, by the column. Waste drops into a bin bay behind the panel line. Staff slice fruit on a separate board near the sink. A juice kiosk with this split keeps blending and washing apart.
Fruit Display Cabinet
A glass cabinet holds three shelves of whole fruit site. The cabinet faces the aisle, next to the right counter. Shelves are 5 mm tempered glass on steel pins, like most retail display cases. LED strips sit behind the top rail, so fruit reads bright. Doors slide and lock, which matters on a busy mall site. Stock goes in twice a day, and the shelf gaps stay wide. Fresh fruit sells the drink before the customer reads a menu. Buyers for a juice kiosk often ask for a cold shelf case as well.
Materials and Assembly
Counters use 1.2 mm stainless steel on a plywood core. Stainless is the only top that takes daily citrus juice. The frame behind the panels is steel angle, welded and primed. Laminate panels are banded before the edges are trimmed. Glass is tempered and mounted on rubber gaskets. Sections join with bolts and a hidden seam strip, and every made to order part carries a mark. A juice kiosk of this size ships in three crates, about 340 kg.
Footprint and Service Flow
The unit measures 3.6 m by 1.8 m in plan. Height stops at 2.2 m, clear of most mall ceiling rules. Front service runs the full width, with the cash point on the right. Staff enter through a side gate behind the column. Two people work inside without touching shoulders. One more can restock fruit from the rear aisle. The cash wrap sits at the right end of the run. This juice kiosk fits plots from 12 to 18 sqm, including the queue space.
Price and Custom Work
Wood fronts age better than gloss panels in a food hall. The blender row keeps one station free for repairs. Fruit on show cuts the need for a printed menu board. List price starts at USD 11,800 for the 3.6 m build. A juice kiosk with four blenders lands in the same band. ukiosks builds this juice kiosk to order in Shenzhen. We can change counter length, cabinet size, wood tone and blender count. Send your plan and we return drawings, sections and a quote. Other retail display fixtures use the same panel system.
| Specification | Detail |
|---|---|
| Overall size | 3.6 x 1.8 x 2.2 m (custom lengths 3.0-4.2 m) |
| Front panels | Light oak laminate on 18 mm MDF |
| Counter top | 1.2 mm stainless steel on plywood core |
| Blender row | Four bases with cable channel |
| Fruit cabinet | Three tempered glass shelves, LED lit |
| Glass guards | 5 mm tempered glass on rubber gaskets |
| Packing | Three crates, about 340 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.