UniqueKiosk · Shenzhen workshop

Wide Acrylic Brochure Rack Eight Pocket

$210.00

Wide clear acrylic brochure rack with eight upright pockets across two tiers, 423 mm wide and 190 mm tall. Price range: USD 210-340, set by width and tier count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wide Eight Slot Body

Eight upright slots run across this brochure holder in two tiers of four. A wide 423 mm body keeps each pocket at 100 mm, so a folded leaflet fits. The lower tier steps out, which clears the upper covers from a reader’s line. The back panel rises 190 mm in total. The base runs 90 mm deep. One unit covers eight titles. This brochure holder replaces a row of single stands on a counter run.

wide eight pocket rack

Upright Divider

A vertical divider stands in each gap of this brochure holder. Each divider runs from the base floor to the top lip, so a sheet cannot cross a pocket. A step notch at the lip leaves a thumb gap. A slim 5 mm wall keeps the sight lines open. A label line sits on the divider face for a title card. The front lip stops a thin sheet from tipping. Our literature displays use the same pitch.

brochure rack front view

Body Build

Clear cast acrylic of 4 mm builds this brochure holder. Tier floors and dividers join with solvent cement, so the pocket grid stays square. A wide body needs a flat base to stay level, and a 90 mm plate carries that. Side panels close the two ends. A flame polish clears the rim of every lip. The unit weighs about 4.5 kg empty. A felt strip under the base protects a counter edge. This brochure holder holds a straight face under a full set.

brochure rack side view

Header And Print

A heading can print on the rear panel of this brochure holder, above the top tier. A logo sits at the far left, where a reader starts. A colour band under each tier marks a language or a price band. A short run takes a vinyl label, and a large run takes a screen print. We print reverse, so the front face stays clear. This brochure holder ships clear with no print as standard. A retail sign holder takes the same head line.

pocket divider detail

Counter Run Fit

A 423 mm body suits a counter run, a lobby plinth and a trade show desk. Eight pockets cover a price list, a plan, a warranty and a leaflet set. A wide unit reads from one standing point without a turn. Staff refill one pocket without moving the rack. A clear body lets the counter finish show under it. Two units split a long list by language. Our countertop displays and display racks cover other formats.

Price And Custom Build

List price starts at USD 210 for this eight pocket brochure holder in clear acrylic. A twelve pocket version at 640 mm width lands near USD 320. A wide brochure rack puts a full title set in one counter run. A stepped tier keeps the lower lips clear. A 4 mm sheet holds the grid square under a load. This brochure holder pairs with acrylic displays and retail displays fixtures. ukiosks builds this brochure holder to order in Shenzhen. We can reset pocket count, pitch, sheet format and print layout. Send your title list and we return drawings and a quote.

Specification Detail
Pockets Eight, four per tier
Overall size 423 x 90 x 190 mm
Pocket width About 100 mm
Material 4 mm cast acrylic, clear
Divider wall 5 mm, full height
Edge finish Flame polished
Weight About 4.5 kg empty

Reviews

There are no reviews yet.

Be the first to review “Wide Acrylic Brochure Rack Eight Pocket”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop