UniqueKiosk · Shenzhen workshop

Welded Iron Pipe Floor Clothing Rack

$385.00

Industrial iron pipe clothing rack with cast tees, a lower tie pipe and two flanged base frames. Price range: USD 385-560, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Pipe Frame

Two upright pipes carry this clothing rack from the floor to a top rail at 1700 mm. A cast tee joins each upright to the top pipe, and a second tee sits at the base. The pipe measures 32 mm and holds a 1400 mm span without a middle leg. A shop hangs twenty five pieces along the line. The joints stay visible, which suits a workshop or a loft floor. Display racks list this pipe frame.

iron pipe floor clothing rack

Flanged Base

Each upright of this clothing rack lands on a base frame with two flanged feet. Every flange plate carries four bolt holes, so a shop bolts the unit to a timber or concrete floor. The base frame spreads 450 mm front to back and stays off the floor by 60 mm. A loaded frame cannot walk across the floor. Two staff slide the unit with the bolts loose. Retail displays fixtures use this base.

pipe clothing rack frame front

Tie And Fittings

A lower tie pipe joins the two uprights near the base of this clothing rack. The tie sits 200 mm up and closes the frame into a rectangle. Cast tees and collars hold every joint, so the frame assembles with a pipe wrench on site. A shop adds the tie first, then sets the uprights square. The fittings carry a threaded shoulder that keeps the pipes true. Clothing racks list the same fittings.

pipe clothing rack base side

Where It Sells

The clothing rack suits an industrial boutique, a denim shop or a workshop showroom. A bare pipe frame reads well beside brick, raw concrete and timber shelving. A shop uses one rail per fit block and rotates stock every week. Shoppers see the whole line from the door, since the frame carries no panel. The tie pipe also takes a small chalk card. Countertop displays fit the same floor.

Load And Care

The rail holds 120 kg when weight spreads along the span. Keep heavy coats near an upright, since the top pipe bends at mid span. A loaded clothing rack stays level within 2 mm across the two base frames. Check the base bolts after a month, since a loose plate lets the frame lean. Oil the collars if a joint squeaks after a floor wash. Read more about our bench on our pipe assembly.

pipe rack flange foot

Span Options

Span runs from 1200 mm to 1600 mm on request. Height runs at 1550 mm or 1700 mm. A third upright can sit at the middle for a long span. The frame also comes with a pipe shelf laid at 900 mm. The finish of this clothing rack also comes in raw oiled iron or warm bronze. List price starts at USD 385 for the 1400 mm frame. ukiosks builds this clothing rack in Shenzhen to your floor, so send your sizes through contact us.

Specification Detail
Span 1400 mm
Height 1700 mm
Pipe 32 mm black iron
Base 2 flanged frames, 450 mm
Tie pipe At 200 mm height
Load 120 kg
Finish Matte black over cast

Reviews

There are no reviews yet.

Be the first to review “Welded Iron Pipe Floor Clothing Rack”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop