UniqueKiosk · Shenzhen workshop

Wedge Acrylic Leaflet Holder Stand

$65.00

Clear acrylic leaflet stand with a slanted back panel and a front lip, 150 mm wide and 230 mm tall on a 180 mm base. Price range: USD 65-110, set by width and thickness.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wedge Body Shape

A slanted back panel gives this brochure holder its wedge form. Two triangular side panels carry the load and close the ends. The back leans at about 20 degrees, so a sheet rests against it. A front lip of 40 mm stops the sheet from sliding out. The base runs 180 mm deep and 150 mm wide. The open top lets staff drop in a sheet from above. This brochure holder holds one title at a time, clearly.

wedge acrylic leaflet stand

Cast Sheet Finish

Cast acrylic of 4 mm builds the body of this brochure holder. A thick sheet keeps the wedge flat after heat bending. Edges are flame polished, so a printed cover reads through without haze. Joints use solvent cement at the side panels, which leaves a thin clear line. A scratch pad restores a dull face after a season. The sheet takes a wipe with water and a soft cloth. This brochure holder holds clarity under a window light.

leaflet stand front view

Desk And Shelf Fit

A 180 mm base keeps this brochure holder steady on a desk. The unit weighs about 700 g, so a clerk carries it in one hand. A wedge face reads from a standing shopper and from a seated visitor. The open top takes a sheet in one push. A paid counter, a clinic desk and a hotel stand suit the shape. A spare unit sits on a second floor. Our literature displays cover a taller version.

leaflet stand side view

Print Placement

A logo fits on the front lip of this brochure holder in small type. A larger print sits on the back panel, read through the acrylic from the front. We reverse print, so a buyer reads the text in the right direction. A colour band along the lip edge marks a department. A printed insert sits behind the sheet for a short campaign. A plain clear stand ships as standard. A retail sign holder uses the same print file. Our acrylic displays list both print routes.

front lip detail

Where It Reads

A single sheet stand suits a menu point, a price card and a leaflet spot. One title per stand keeps a message simple. Staff change the sheet in seconds, so a daily menu works. A clear body does not block the counter surface under it. A row of three stands holds a leaflet set. A small footprint fits a narrow service point. Our countertop easels cover a smaller format.

Price And Custom Build

List price starts at USD 65 for this clear leaflet stand at 150 mm width. A 210 mm wide unit with a printed lip lands near USD 92. A leaflet stand holds one sheet at a fixed reading angle. A 4 mm sheet keeps the wedge flat through a season. A polished edge keeps a colour cover sharp. This brochure holder pairs with countertop displays and retail displays fixtures. ukiosks builds this brochure holder to order in Shenzhen. We can reset sheet width, slant angle, lip height and print layout. Send your sheet size and we return drawings and a quote.

Specification Detail
Overall size 150 x 180 x 230 mm
Sheet capacity One A5 or A4 folded sheet
Material 4 mm cast acrylic, clear
Slant angle About 20 degrees
Front lip 40 mm high
Edge finish Flame polished
Weight About 700 g

Reviews

There are no reviews yet.

Be the first to review “Wedge Acrylic Leaflet Holder Stand”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop