UniqueKiosk · Shenzhen workshop
Walnut Wall Display Rack with Glass Shelves and Drawers
$980.00
Walnut veneer wall display rack with four glass shelf tiers and a three drawer base. Price range: USD 980-1,450, set by width and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Four Shelf Tiers
Four glass shelves sit on this wall display rack in a fixed run. The unit stands 2100 mm tall and 1200 mm wide, with a 420 mm base cabinet. A shop fits the rack against a wall and keeps the floor clear. Each shelf holds 15 kg, so a stack of folded knitwear stays level. Shelf depth runs 350 mm, and the glass sits on steel brackets. Display shelves list this tier height. A shop moves the shelves on a 50 mm pitch, and the pin holes show the setting. The glass edge is polished, so nothing catches a sleeve on the way past.
Three Drawer Base
A three drawer base closes the bottom of this wall display rack. Each drawer runs 400 mm deep and takes a soft close slide. The fronts carry the same walnut veneer as the back panel. A lock bar sits above the drawers and takes a single key. A shop stores stock and tissue inside, so the floor stays tidy. The base sits on four levellers, so the cabinet stays plumb on tile. Display cases share this base height. A shallow drawer also takes price tools and a spare lamp.
Build and Finish
The frame uses 25 mm steel tube and an 18 mm plywood core. Walnut veneer covers the back panel and the drawer fronts of this wall display rack. A matte lacquer seals the veneer and keeps a wet cloth from marking the grain. Joints are welded and ground flat, then powder coated in warm grey. The glass is 8 mm tempered, so a shelf takes a knock. Every panel leaves the bench after a flatness check. A bent back panel would show a shadow line on the wall. Wall fixtures follow the same bench check.
Where It Fits
Boutiques use this wall display rack for knitwear, denim and small leather goods. A shoe shop runs two units side by side and fills the wall. A jeweller sets trays on the low shelf and bags on the top tier. The floor under a wall display rack stays open, so a small unit reads bigger. A pop up shop likes the base, since it holds a week of stock. Store display racks share this wall footprint. A shop adds a sign holder on top when the wall has height left.
Styled Wall
A styled wall shows how much a single wall display rack carries. Folded knitwear sits two stacks wide on each upper tier. Leather bags take the middle shelf at eye level. Trays, a candle and a price card fill the low shelf. A shop rotates the mix each season and the rack still reads full. Keep the heaviest stack near the bracket, since the glass flexes least there. Store fixtures follow this stacking rule across the range. A soft shop light from the ceiling keeps the veneer grain visible.
Order and Price
Width runs at 900 mm, 1200 mm or 1500 mm. Height runs at 1800 mm or 2100 mm. A shop can order three, four or five shelf tiers for this wall display rack. A light bar, a sign holder and a mirror back are options. The veneer comes in walnut, oak or a plain laminate. A shop with a low wall can shorten the upright and keep the drawer base. List price starts at USD 980 for the 1200 mm unit. ukiosks builds this wall display rack in Shenzhen to order, so send your drawing through contact us.
| Specification | Detail |
|---|---|
| Width | 1200 mm |
| Height | 2100 mm |
| Shelf Tiers | 4 glass shelves |
| Shelf Depth | 350 mm |
| Base | 3 drawers with lock bar |
| Back Panel | Walnut veneer |
| Load | 15 kg per shelf |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.