UniqueKiosk · Shenzhen workshop

Walnut Countertop Curio Case With Glass Panels

$390.00

Countertop display case with a walnut frame, clear glass front, sides and top, one glass shelf and a stepped base, 355 x 150 x 405 mm. Price range: USD 300-600, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Curio Box Format

A curio box format turns a shelf into a display. This countertop display case is 355 mm wide, 150 mm deep and 405 mm tall. Corner posts are 24 mm walnut, joined by a top cap and a stepped base plinth. Glass fills the front, the sides and the top, so the goods read from four angles. One glass shelf sits at mid height. The form suits a single object, such as a coin, a mineral or a small model. The countertop cases range lists this box in three heights.

walnut countertop curio case

Glass Everywhere

Glass covers four faces of this countertop display case. Panels are 4 mm clear with a polished edge and sit in a 6 mm groove cut into the walnut. No putty or clip shows, so the box reads clean from any side. The top glass is set flush with the cap, so a light can sit on it. Glass adds about 2 kg to the weight. A broken panel can be swapped without removing the frame. Every countertop display case we build gets a panel fit check.

curio case front view

Stepped Base

The stepped base of this countertop display case gives it a firm seat. Two mouldings run at 8 mm and 16 mm, cut on a spindle and sanded by hand. The base is 30 mm thick, so the box does not feel light on a counter. A felt pad can be added on request, so the wood does not mark. Feet are flat, so the case sits level on stone or glass. retail display fixtures crews fit the base last. display cases cases use the same moulding. This countertop display case ships with clear fitting notes.

curio case side view

Build and Care

Walnut posts are cut, grooved and assembled in one bench run. Glass goes in after the frame is square, and a thin silicone bead holds it at the base. The top cap is glued and pinned, then sanded flush. A matte clear coat keeps the grain visible with no gloss. Care is a dry cloth on the glass and a damp one on the wood. Packing is one carton with foam corners. cash counter desks use one for a single high value piece. This countertop display case ships with clear fitting notes.

stepped walnut base detail

Where It Sits

This countertop display case suits a coin dealer, a museum shop and a gem trader. A 355 mm footprint fits a narrow counter with a loupe and a card stand beside it. Height at 405 mm keeps the top glass within easy reach, so a staff member can lift an item out. The four glass faces let a shopper inspect from the side without asking. Small stock stays dust free under a closed box. The shop fit outs package adds a label holder. food and drink shops tills keep one for cards.

Price and Custom Build

A small glass box on a counter sells a high value piece with a low footprint. Walnut posts give the box a solid frame and a warm edge. Four glass faces let a shopper inspect from any side. List price starts at USD 390 for the 355 mm unit. A 450 mm build with two shelves lands near USD 520. ukiosks builds this countertop display case to order in Shenzhen. We can reset width, height, post timber and shelf count. Send your plan and we return drawings and a quote.

Specification Detail
Overall size 355 x 150 x 405 mm (custom 300-450 mm)
Glass 4 mm clear on four faces
Frame 24 mm walnut posts, grooved
Shelves One glass shelf at mid height
Base 30 mm stepped moulding
Finish Matte clear coat
Packing One carton, about 9 kg

Reviews

There are no reviews yet.

Be the first to review “Walnut Countertop Curio Case With Glass Panels”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop