UniqueKiosk · Shenzhen workshop
Twin Shelf Acrylic Riser with Wood Panels
$62.00
Two shelf acrylic riser 305 x 105 mm with pine boards between clear acrylic panels. Price range: USD 62-95, set by length and shelf depth.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Two Wide Boards
Two pine boards sit at two heights on this acrylic riser. The lower board rests at counter level and the upper board rises to 73 mm. The unit runs 305 mm wide and only 105 mm deep, which keeps a shallow shelf usable. Each board rises 40 mm, so a back row of small bottles shows over the front row. This acrylic riser suits a fragrance bar or a card table. Countertop displays use the same shallow depth.
Clamp And Panel
Two clear acrylic end panels carry the boards, and two screws per end hold each board. The side profile shows a slim clamp shape, so the panel hides little stock. Each board runs 12 mm thick with a sanded pine face. A finished acrylic riser weighs about 1 kg, so it moves with one hand. The low build keeps a shelf line clean. A shallow acrylic riser also sits well inside a glass case. Acrylic displays share this end panel build.
Fragrance And Cards
The riser works on a fragrance counter, a greeting card rack, a hotel desk or a tasting station. Two levels hold a tester row and a sealed stock row. A shop sets perfume bottles on the lower board and gift boxes above. A card display uses the top board for seasonal stock. The clear ends let a price card show through from the side. Retail displays fixtures fit the same depth.
Load And Fit
Each board carries about 4 kg when weight sits across the span. Keep a heavy bottle group close to an end panel, because the middle flexes first. A full acrylic riser stays level within 2 mm along the width. Check the screws after assembly, since a loose end lets the board rock. Place the unit on a flat counter to keep both boards true. Display racks hold stock behind it.
Clean And Store
Wipe the pine boards dry and clean the acrylic ends with mild soap and a microfiber cloth. Keep the acrylic riser away from solvent cleaners, which dull the clear edge. The unit ships flat and takes about five minutes to assemble. Store it upright, because a stack of boards can scratch a panel. Read more about our bench and the finish we use.
Length And Depth
Length runs from 250 mm to 450 mm on request. Depth runs from 90 mm to 150 mm to fit a narrow shelf. Pine is the standard board, with oak or walnut as an option. The acrylic riser also takes a third board for a taller row. List price starts at USD 62 for the 305 mm unit. ukiosks builds this acrylic riser in Shenzhen to your shelf depth, so send your plan through contact us.
| Specification | Detail |
|---|---|
| Shelves | 2 pine boards |
| Footprint | 305 x 105 mm |
| Height | 73 mm |
| Material | 4 mm acrylic, 12 mm pine |
| Step rise | 40 mm |
| Weight | 1.0 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Violin Exhibition Display Case, Glass Tower 1.8 m
Price:
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:








Reviews
There are no reviews yet.