UniqueKiosk · Shenzhen workshop
Twin Bar Clothing Rack with Two Rail Heights
$295.00
Two rail clothing rack on a wide frame with braced feet and castors. Price range: USD 295-420, set by span.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Two Rail Heights
Two rails run on this clothing rack, one at 1600 mm and one at 1300 mm. A shop shortens the second line by 300 mm, so a skirt or a folded shirt hangs clear. The pair doubles the stock on one frame without a second unit. Staff load the upper rail with coats and the lower rail with tops. The two heights also give a stepped look on a plain wall. Display racks list this twin rail.
Braced Feet
Each end of this clothing rack carries a braced foot with two small castors. The brace runs from the post to the foot at 45 degrees, so the frame resists a sideways pull. A shop rolls the unit to a window and parks it for the week. The castors also let one person move a loaded rail line. Four feet spread the load on a tiled floor. Retail displays fixtures share this braced foot.
Low Cross Bar
A low bar ties the two braced feet of this clothing rack at 150 mm. The bar keeps the frame square, so a shopper can lean on a rail without a sway. A shop sets two units end to end for a long seasonal run. The bar also stops a basket from rolling under the hang line. Clothing racks list this cross bar.
Shop Use
The clothing rack suits a stockroom, a market stall or a mall corridor. The twin rails show a full range in one footprint. A shop uses the frame for a markdown line and keeps the wall free. The castors on this clothing rack also help with a daily floor reset in a narrow mall bay. Countertop displays fit the same corridor.
Load And Care
Each rail holds 50 kg when weight spreads along the span. Keep heavy coats on the upper rail, since the lower rail sits nearer the foot brace. A loaded clothing rack stays level within 2 mm across the four castors. Check the socket weld after a month, since a short weld lets a rail roll. Clear thread from the castors once a week. Read more about our bench on our twin rails.
Span Options
Span runs from 1200 mm to 1800 mm on request. Height runs at 1600 mm or 1750 mm. A shop can add a third rail for a three tier line. The castors can swap for fixed feet on a soft floor. The finish also comes in chalk white or oxide grey. List price starts at USD 295 for the 1500 mm frame. ukiosks builds this clothing rack in Shenzhen to order, so send your span through contact us.
| Specification | Detail |
|---|---|
| Span | 1500 mm |
| Height | 1650 mm |
| Frame | 25 mm round steel |
| Rails | 2, at 1600 and 1300 mm |
| Feet | Braced, 2 castors each |
| Load | 50 kg per rail |
| Finish | Matte black powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.