UniqueKiosk · Shenzhen workshop

Tubular Steel Garment Rack with Display Shelf

$860.00

Raw tubular steel garment rack with a top cross bar, one shelf, a hanging bar and a white deck base. Price range: USD 860-1,240, set by height.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Tall Open Frame

A tall open frame sets the shape of this steel garment rack. The frame runs 2200 mm high and 1100 mm wide with 30 mm square tube. A shop hangs a long dress line in the open bay and keeps the hem clear of the deck. The open frame also lets a shopper see the full garment from the aisle. This steel garment rack suits a bridal corner or a coat floor. Clothing racks list this frame height.

steel garment rack

Shelf And Hangbar

One shelf splits this steel garment rack at 1500 mm. The shelf runs 350 mm deep and holds a folded stack or a box row. A hangbar sits right under the shelf at 1450 mm and carries a short jacket line. A shop sets the stack above and the hang below, so one bay shows two ranges. Display shelves share this shelf depth.

steel garment rack front

White Deck Base

A white deck closes the base of this steel garment rack. The deck runs 400 mm deep and takes shoe pairs or a look book stack. A shop sets the deck at 150 mm, so a shopper sees the product from the aisle. The deck also ties the four posts at the floor and stops a sway. Display racks use this deck depth.

steel garment rack side

Shop Use

This steel garment rack fits a bridal bay, a coat wall or a studio floor. The tall frame shows a full length dress without a fold. A shop sets the unit 500 mm from a wall and keeps 900 mm clear in front. The raw steel face of this steel garment rack reads neutral against a white wall or a grey one. A tall bay also keeps the display line inside one footprint. Retail displays fixtures fit the same floor.

Load And Care

This steel garment rack holds 45 kg on the hangbar and 25 kg on the shelf. Keep the heavy coat row near a post, since the bar sags at mid span. A loaded bar stays level within 3 mm over 1100 mm. Wipe the steel with a dry cloth and oil the bare face twice a year. Check the post bolts after a month, since a loose bolt lets the frame lean. Read more about our bench on our tubular builds.

rack shelf bracket detail

Size Options

Height runs at 2200 mm or 2500 mm on request. Width runs at 1100 mm or 1400 mm. A shop can order a second shelf under the hangbar, or a glass deck in place of the white one. The tube can take a clear powder coat over the raw steel. List price starts at USD 860 for the 2200 mm unit. ukiosks builds this steel garment rack in Shenzhen to order, so send your bay size through contact us.

Specification Detail
Height 2200 mm
Width 1100 mm
Depth 500 mm
Shelf 1, 350 mm deep
Hangbar 1450 mm
Load 45 kg bar, 25 kg shelf
Finish Raw brushed steel

Reviews

There are no reviews yet.

Be the first to review “Tubular Steel Garment Rack with Display Shelf”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop