UniqueKiosk · Shenzhen workshop
Triple Pocket Acrylic Wall Brochure Rack
$125.00
Clear acrylic wall rack with three staggered pockets and two hanging holes, 300 mm wide and 350 mm tall. Price range: USD 125-210, set by pocket count and width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Staggered Pocket Set
Three pockets stagger across this brochure holder, so a reader sees each lip from one spot. The top pocket sits level with the panel, and the lower pockets step out and down. Each pocket takes a sheet of up to 148 x 210 mm. A lower notch in every lip leaves a thumb gap. Side walls tie the pockets into one body. The rack runs 300 mm wide and 350 mm tall. This brochure holder carries three titles in a wall spot of one sheet width.
Wall Mount Depth
Two round holes at the top panel hold this brochure holder on a wall. The holes sit 120 mm apart, so one plaster anchor and one screw carry the load. A back panel runs flat against the wall, and the pocket depth adds only 60 mm. A clerk hangs the unit with two screws in under five minutes. A framed wall, a slatwall panel and a plaster column all take it. This brochure holder keeps a walkway clear of a floor stand.
Sheet And Edge Work
Clear acrylic of 3 mm builds the pockets of this brochure holder. Each pocket bends from a single sheet, so the lip has no weld. A flame polish clears the cut edge, which keeps a printed cover sharp. A solvent joint ties the side walls to the pocket set. The unit weighs about 1 kg empty. A damp cloth clears a mark without a solvent. Our acrylic displays use the same sheet grade.
Print On Panel
The top panel of this brochure holder takes a printed heading. We print on the reverse face, so the front stays clear and the text reads through. A logo sits above the top pocket, where a reader looks first. A colour band along the lower pocket lip marks a department. A short campaign takes a vinyl label over the panel. This brochure holder ships plain clear as standard. A retail sign holder takes a second heading.
Showroom Placement
A wall rack suits a showroom column, a clinic corridor and a hotel lift lobby. Three pockets hold a price list, a floor map and a service note. A wall spot leaves the counter free for a till or a card reader. A shopper reads the set without a stop in the walkway. Staff pull the whole unit down for a clean in a season. Our wall mounted brochure holders cover a single pocket. A wall mount fixture carries the anchor.
Price And Custom Build
List price starts at USD 125 for this three pocket brochure holder in clear acrylic. A five pocket version at 420 mm width lands near USD 185. A wall brochure rack puts three titles in one narrow wall column. A staggered lip shows every cover from one standing spot. A 3 mm sheet keeps the unit light for a plaster anchor. This brochure holder pairs with literature displays and retail displays fixtures. ukiosks builds this brochure holder to order in Shenzhen. We can reset pocket count, width, hole spacing and print layout. Send your wall plan and we return drawings and a quote.
| Specification | Detail |
|---|---|
| Pockets | Three staggered pockets |
| Sheet size | Up to 148 x 210 mm |
| Overall size | 300 x 60 x 350 mm |
| Material | 3 mm cast acrylic, clear |
| Fixing | Two 6 mm holes, 120 mm apart |
| Edge finish | Flame polished |
| Weight | About 1 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Violin Exhibition Display Case, Glass Tower 1.8 m
Price:
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:








Reviews
There are no reviews yet.