UniqueKiosk · Shenzhen workshop

Trestle Square Leg A-Frame Clothing Rail

$268.00

Black steel A-frame clothing rail built from square tube with a lower cross bar. Price range: USD 268-420, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Square Tube Build

This clothing rack builds from 40 mm square tube, not round pipe. A square section gives the frame a flat face. The frame reads as a timber trestle, not a bike rack. Each side forms an A shape with one post and two splayed legs. The square tube also welds flat at the shoulder, so the frame holds shape under load. A shop hangs twenty five pieces on one span. Display racks list this square build.

a-frame clothing rail

Splayed Stance

Two splayed legs on each side carry this clothing rack. Each leg leans out 120 mm at the base, and a mid bar ties the pair at 500 mm. The stance puts the load under the post, so the frame resists a sideways push. A shopper can lean on the rail without tipping the unit. The feet stay square to the floor and need no castor. A shop slides the rack on two feet for a floor reset. Retail displays fixtures share this stance.

clothing rail square frame

Cross Bar

A lower cross bar ties the two A frames at 100 mm above the floor on this clothing rack. The bar closes the triangle between the legs and the floor, so the frame holds its width. A shop stacks shoeboxes under the bar, since the gap stays open. The bar also takes the weight of a hanging sign. Staff lift one end and walk the unit along the bay. This clothing rack bar welds square at both ends. Clothing racks list this cross bar.

clothing rail splayed side

Floor Use

The clothing rack suits a boutique floor, a denim bar or a workshop showroom. One unit fits a 1200 mm bay, and two units form a 2400 mm stock run. A shop uses the flat face for a range card and keeps the rail line clear. The frame leaves the wall free, so a shopper sees the wall display behind the stock. Countertop displays fit the same bay.

Load And Care

The top rail holds 95 kg when weight spreads along the span. Keep heavy coats near a post, since both spans bend at mid rail. A loaded clothing rack stays level within 2 mm across the four feet. Check the mid bar bolts after a month, since a loose bar lets a leg splay. Wipe the powder coat with a damp cloth and avoid abrasive pads. Read more about our bench on our square tube work.

clothing rail post weld

Width Options

Width runs from 1000 mm to 1600 mm on request. Height runs at 1500 mm or 1650 mm. A shop can add a second rail at 900 mm for a two tier line. The frame also comes with a slat shelf laid across the cross bar. The finish also comes in warm white or oxide grey. List price starts at USD 268 for the 1200 mm frame. ukiosks builds this clothing rack in Shenzhen to your floor plan, so send your sizes through contact us.

Specification Detail
Width 1200 mm
Height 1600 mm
Tube 40 mm square steel
Side frames A shape, 2 per unit
Cross bar At 100 mm height
Load 95 kg
Finish Matte black powder coat

Reviews

There are no reviews yet.

Be the first to review “Trestle Square Leg A-Frame Clothing Rail”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop