UniqueKiosk · Shenzhen workshop

Timber A-Frame Boutique Clothing Rack

$285.00

Solid pine A-frame clothing rack, 1200 x 500 mm with a 1500 mm hanging bar. Price range: USD 285-420, set by width and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Plain Timber Frame

This clothing rack is built from solid pine with no painted finish. Two square uprights carry a round hanging bar across the top. Each upright sits on a cross foot, so the frame stands without a wall. The unit runs 1200 mm wide and 500 mm deep. Height reaches 1500 mm at the bar. A shopper sees a full rail of stock at chest level. Display racks use the same timber frame.

timber a-frame clothing rack

Bar And Joints

The hanging bar runs 45 mm thick, which suits wood hangers and heavy knits. Each bar end passes through a drilled hole in the upright and stops on a cut cap. Bolts at the foot cross hold the frame square. A finished clothing rack weighs about 7.5 kg, so two staff move it. The sanded face keeps splinters off a garment. A slim clothing rack like this stays steady under load. Retail displays fixtures share this joint detail.

boutique clothing rack front

Boutique Use

The frame works in a boutique, a market stall, a studio or a hotel wardrobe corner. One rail holds a seasonal story of twenty to twenty five pieces on wood hangers. A shop sets the unit beside a fitting room door. A studio uses it for a shoot rail. The open frame keeps a small floor plan light. Countertop displays fit the same narrow depth.

clothing rack narrow side

Load And Balance

The bar carries about 60 kg when weight spreads along the rail. Keep a heavy coat group near an upright, because the bar span bends first. A loaded clothing rack stays level within 2 mm over the width. Set the feet on a flat floor so the frame does not walk. A single clothing rack should sit clear of a door swing. Clothing racks list the same load rule for long rails.

Finish And Care

The standard finish is sanded pine with a clear matte coat. Wipe the frame with a dry cloth and keep water off the joints. A clear coated clothing rack holds its pale tone under shop light. Recheck the foot bolts after a move. A timber clothing rack also needs a dry store between seasons. Read more about our bench and the finish we use.

clothing rack bar joint

Width And Height

Width runs from 900 mm to 1600 mm on request. Bar height runs from 1300 mm to 1800 mm. Pine is the standard timber, with oak or ash as an option. The clothing rack also takes a shelf board at mid height for folded stock. List price starts at USD 285 for the 1200 mm unit. ukiosks builds this clothing rack in Shenzhen to your rail width, so send your plan through contact us.

Specification Detail
Frame Solid pine, square uprights
Footprint 1200 x 500 mm
Bar height 1500 mm
Bar 45 mm round timber
Load 60 kg
Weight 7.5 kg

Reviews

There are no reviews yet.

Be the first to review “Timber A-Frame Boutique Clothing Rack”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop