UniqueKiosk · Shenzhen workshop

Tempered Glass Jewelry Counter With Wood Body

$890.00

Jewelry glass display case with a tempered glass hood, white deck and tan wood cabinet on black tapered legs, sized 1.2 x 0.55 x 1.0 m. Price range: USD 300-1,500, set by size and hood.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Hood on Wood Body

A tempered glass hood sits on a wood body in this jewelry counter. The hood is 1,200 mm wide, 550 mm deep and 260 mm tall, with a rounded black edge band. Glass is 6 mm tempered, so it takes a knock without shattering. The body below is 18 mm board with a tan wood laminate face. Four black legs taper to the floor. A framed panel and a ring handle sit on the front. This glass display case reads warm against pale stone floors. The display cases line carries the same hood profile.

wood body jewelry counter

Deck and Cabinet

A white deck sits under the hood of this glass display case. The deck is 200 mm deep with a soft pad surface, so trays sit still. The hood lifts off as one piece for restocking. Below the deck, a cabinet door opens to a shelf for boxes. Door width is 450 mm with a ring handle and a magnetic catch. A second shelf sits inside at mid height. Every glass display case we build keeps the door clear of the legs. countertop cases units use the same catch.

jewelry counter front view

Legs and Frame

Black tapered legs carry this glass display case. Each leg is 45 mm at the top and 25 mm at the floor, turned from solid wood. A black plinth band wraps the body base at 60 mm. Legs bolt through the frame with a steel plate for strength. The hood band is a black film on glass, so no paint chip shows. Feet take a 10 mm shim for uneven floors. retail display fixtures crews fit the band before the hood goes on. This glass display case stands level on tile.

jewelry counter side view

Build and Finish

Board panels are cut, edged and laminate faced in one run. Legs are turned, sanded and sprayed in a batch. The hood is assembled with a sealed band at each corner. Glass is tempered to order, so lead time runs a little longer. Every glass display case is squared and loaded on a bench before packing. Two people set up in about 30 minutes with no tools beyond a hex key.

cabinet ring handle detail

Where It Sells

This glass display case suits a boutique, a hotel lobby and a small jeweller. A 1.2 m run works in a 3 m bay with a stool at one end. Height at 1.0 m puts the deck below a standing shopper eye line, so the hood top reads first. The cabinet holds gift boxes and cleaning cloths. Staff restock before the shutters open, one hood lift at a time. Many cash counter desks sit opposite one counter. The shop fit outs package adds a low bench.

Price and Custom Build

A wood body softens a glass counter and suits a boutique interior. A tempered hood takes daily handling without chips. Black legs lift the body so the floor stays visible. List price starts at USD 890 for the 1.2 m unit. A 1.6 m build with two hood sections lands near USD 1,240. ukiosks builds this glass display case to order in Shenzhen. We can reset length, body finish, leg style and hood height. Send your plan and we return drawings and a quote. Nearby food and drink shops shops use the same body frame.

Specification Detail
Overall size 1.2 x 0.55 x 1.0 m (custom 0.9-1.6 m)
Hood 6 mm tempered glass, 260 mm tall
Body 18 mm board with tan wood laminate
Legs Solid wood, black lacquer, 45 mm top
Door 450 mm with ring handle and catch
Deck White padded deck, 200 mm deep
Packing One crate, about 85 kg

Reviews

There are no reviews yet.

Be the first to review “Tempered Glass Jewelry Counter With Wood Body”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop