UniqueKiosk · Shenzhen workshop
Tabletop Acrylic Brochure Holder 6×9
$60.00
Clear acrylic tabletop brochure holder for 6 x 9 inch sheets, with a notched front pocket and a flat base. Price range: USD 60-100, set by format and sheet thickness.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Pocket And Back Panel
A wide front pocket holds the sheet on this brochure holder. The lip runs a shallow notch in the middle, which leaves a gap for a thumb. A tall back panel stands 120 mm above the pocket, so a printed cover reads full height. The pocket grips a 6 x 9 inch sheet at 152 x 229 mm. Side walls close both ends, so a sheet cannot slide out. The base plate runs 20 mm deep. This brochure holder shows one cover without a support frame.
Three Millimetre Sheet
Three millimetre clear acrylic forms the panels of this brochure holder. A thin sheet keeps the unit light at about 350 g. The panel bends through heat, so the pocket lip has no weld mark. A polished edge removes the cutting line, which keeps the sheet clear. A cast grade resists a stress mark under a light load. A wipe with a damp cloth clears a fingerprint. This brochure holder stays clear on a bright counter. A countertop easel uses the same sheet.
Counter Fit
A flat base plate lets this brochure holder stand on any counter. The back slants about 8 degrees, so the face reads from a standing eye. The unit covers a footprint of 180 x 60 mm. A clerk slides it beside a till or a menu board. The whole piece lifts in one hand for cleaning. A clear body shows the counter finish under it. Our countertop displays hold the same base detail.
Print And Insert
A printed card can sit behind the back panel of this brochure holder. We print reverse, so text reads through the sheet. A logo on the pocket front uses a small vinyl label. A colour band at the top edge marks a season. A short campaign takes a loose insert, which staff swap in seconds. A long run takes a screen print on the rear panel. This brochure holder ships clear with no print. A retail sign holder shares the print setup.
Retail Use Case
A 6 x 9 inch format suits a service list, a class schedule and a warranty sheet. A dental desk, a phone shop and a gym desk use this size. One holder carries one document, which keeps a message clean. Staff print a fresh sheet in house and slide it in. A clear panel lets a colour header read at a distance. Two units side by side split two languages. Our literature displays cover larger racks.
Price And Custom Build
List price starts at USD 60 for this 6 x 9 inch brochure holder in clear acrylic. A wide body unit for A4 sheets lands near USD 85. A tabletop brochure holder keeps a service list in view at a desk. A notched lip lets a thumb pull a sheet with one move. A thin sheet keeps the unit light for daily moves. This brochure holder pairs with acrylic displays and retail displays fixtures. ukiosks builds this brochure holder to order in Shenzhen. We can reset pocket width, back height, sheet thickness and print layout. Send your sheet size and we return drawings and a quote.
| Specification | Detail |
|---|---|
| Sheet format | 6 x 9 inch, 152 x 229 mm |
| Overall size | 180 x 60 x 260 mm |
| Material | 3 mm cast acrylic, clear |
| Pocket depth | 35 mm |
| Base plate | 20 mm deep, flat |
| Edge finish | Flame polished |
| Weight | About 350 g |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Violin Exhibition Display Case, Glass Tower 1.8 m
Price:
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:








Reviews
There are no reviews yet.