UniqueKiosk · Shenzhen workshop
Striped Drink Kiosk With Stone Tops and Two Sink Bays
$13,200.00
Striped panel drink kiosk with stone look counter tops, two sink bays and glass rails, sized 4.0 x 2.0 m for large mall plots. Price range: USD 9,000-15,000, set by size and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Striped Panel Front
Vertical stripes carry the whole front of this juice kiosk. Orange, yellow and blue boards sit side by side, each 120 mm wide. A few bays switch to a chevron pattern, cut from the same boards. Panels are 18 mm ply with a laminated face, so colour stays flat. A teal board marks the service end. A wood trim caps the top edge of every bay. Arrangement follows the drawing, so each juice kiosk can run its own pattern. The food and drinks aisle gets a strong front face at low cost.
Stone Tops and Counter Runs
Counter tops use a stone look compact laminate, 12 mm thick. The laminate is lighter than real stone and easy to cut on site. The main run measures 4.0 m, with two rounded ends. One end curves out at 500 mm radius, so the queue bends around it. Glass rails sit on the back edge only. Two low work tops sit inside, at 850 mm. A juice kiosk with stone tops takes hot cups without marking. display cases share the same rail posts when you add a cold case.
Sink Bays and Prep
Two stainless sink bays sit in the inner work run. Each bay is 500 mm wide with a single bowl and tap. Bays are set apart, so two staff can wash at the same time. A drain board sits between them. Ice bins go under the counter, clear of the sinks. A small juicer stands at the left bay. Waste drops into a bin bay at the rear. This juice kiosk keeps washing, juicing and serving in three zones. countertop cases can sit on the front counter for cut fruit.
Build and Finishes
Carcass boards are 18 mm ply with a moisture resistant core. Laminate faces are pressed at 60 C, so edges stay tight. Stripes are cut from one sheet run, so tones match bay to bay. Counter tops take a 20 mm edge trim in wood. Steel posts are 40 mm tube, coated matte. Glass is tempered and set in rubber gaskets. Every juice kiosk is assembled once in the workshop before packing. cash counter sections use the same bolt pattern.
Site Fit and Delivery
The plan measures 4.0 m by 2.0 m, with height at 2.3 m. It suits plots from 16 to 22 sqm, queue space included. Weight lands near 420 kg across five crates. Long runs ship in two halves, joined on site with a seam trim. Site work is bolting sections, then setting tops and sinks. A crew of three needs about two days for a juice kiosk this long. One 16 A circuit runs lights and prep gear. retail display fixtures clearance rules apply at the counter ends.
Price and Custom Build
Long striped runs read well from 40 m away in a mall. Stone tops hold up better than laminate in daily juice work. Two sinks keep the washing line moving at peak hours. List price starts at USD 13,200 for the 4.0 m build. A shorter juice kiosk at 3.0 m drops to about USD 11,400. ukiosks builds this juice kiosk to order in Shenzhen. We can reset stripe colours, chevron bays, run length and sink count. Send your plan and we return drawings, sections and a quote. Nearby coffee fit-outs counters reuse the same top and rail parts.
| Specification | Detail |
|---|---|
| Overall size | 4.0 x 2.0 x 2.3 m (custom 3.0-4.6 m) |
| Front panels | Striped laminate on 18 mm plywood |
| Counter tops | 12 mm stone look compact laminate |
| Sink bays | Two stainless bays with taps |
| Glass rails | 5 mm tempered glass on steel posts |
| Lighting | LED panels in two light towers, 220 V |
| Packing | Five crates, about 420 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.