UniqueKiosk · Shenzhen workshop

Staggered Cube Steel Shelf Display Rack

$389.00

Open cube display rack in matte black steel with offset shelves on five levels. Price range: USD 389-560, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Offset Cubes

Five box frames stack at different offsets on this display rack. The left column runs full height, and the right boxes step in and out. A shop sets a small item in each box, so the eye reads one object at a time. The stagger also breaks a plain wall line. The empty box at the top takes a plant or a tall vase. Display racks list this cube frame.

staggered cube display rack

Open Box Plates

Each box of this display rack carries a plate at its base. The plate runs 350 mm deep and closes the frame, so a jar sits flat. An open box also holds a short row of boxes without a door. A shop keeps a light item in the top box, since the plate sits on a short weld. Retail displays fixtures share this box plate.

display rack cubes front

Square Tube Frame

The frame of this display rack runs 25 mm square steel tube. Each joint welds on two faces, so the box stays square after a move. A shop leans the unit on a plaster wall with no fixings. The narrow tube of this display rack also keeps the silhouette light inside a small shop bay. Display shelves list this tube size.

display rack cubes side

Shop Use

The display rack suits a gallery corner, a lifestyle shop or a hotel lobby. Five boxes show a mixed range of small goods. A shop sets the unit near a fitting room and keeps bags in the low box. The open back of this display rack also lets a ceiling spotlight reach the stock below. Countertop displays fit the same corner.

Load And Care

Each box plate holds 25 kg on this display rack, and the base box holds 40 kg. Keep heavy stock in the low box, since the upper plate sits on a short weld. A loaded rack stays level within 2 mm across the base frame. Check the welds after a month, since a loose weld lets a plate dip. Wipe the plates and keep the box joints dry. Read more about our bench on our cube frames.

display rack cube weld

Size Options

Width runs from 800 mm to 1100 mm on request. Height runs at 1700 mm or 2000 mm. A shop can order three boxes or six for a different rhythm. The plate can swap for an oak board inside a box. The finish also comes in chalk white or oxide grey. List price starts at USD 389 for the five box unit. ukiosks builds this display rack in Shenzhen to order, so send your box plan through contact us.

Specification Detail
Width 900 mm
Height 1800 mm
Depth 350 mm
Boxes 5 open frames
Plate 25 mm steel
Load 25 kg box, 40 kg base
Finish Matte black powder coat

Reviews

There are no reviews yet.

Be the first to review “Staggered Cube Steel Shelf Display Rack”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop