UniqueKiosk · Shenzhen workshop
Sliding Glass Door Display Cabinet with Slatwall Back
$700.00
Black frame display case with two sliding glass doors, four shelves and a slatwall back. Price range: USD 700-1,050, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Sliding Door Front
Two clear glass doors slide on a black aluminium track across the front of this display case. Each door runs on two rollers, so one finger moves a 900 mm leaf. A shop opens half the case and keeps the other half shut. The doors also take a lock plate at the centre mullion. Display cases list this track size. A sliding front also needs less swing room than a hinged door.
Slatwall Interior
A slatwall panel lines the back of this display case. The grooves sit on a 100 mm pitch and take a hook or a small shelf clip. A shop hangs a short line of carded stock behind the glass and gains a second layer of display. The panel also hides the rear cable run. Display shelves use this groove pitch. A slatwall back also lets a staff member reset the layout in minutes.
Shelf Stack
Four clear glass shelves fill this display case at a 350 mm pitch. Each shelf takes an 8 mm clear board with a polished front edge. A shop sets a ceramic line on the lower shelves and a light line above. The shelf on this display case also clips into the side rails, so a level change needs no drill. A short rail also keeps the glass from sliding. Countertop displays share this shelf gauge.
Shop Use
This display case fits a gift shop, a jewelry corner or a hotel lobby. The footprint runs 900 x 350 mm, so a pair covers a 1.8 m bay along one wall. A shop sets the case at eye height on a plinth and keeps the glass clean. A dark frame also reads sharp against a pale wall. Retail displays fixtures fit the same bay.
Load and Care
Each shelf of this display case holds 12 kg across an 850 mm span. Keep the heavy stone item on the low shelf, since the glass bows under a point load. A loaded shelf stays level within 2 mm when the frame stands square. Clean the track with a soft brush every month, since dust slows the rollers. Wipe the glass with water and a soft cloth only. Read more about our bench on our sliding fronts.
Size Options
Width runs at 900 mm or 1200 mm on request. Height runs at 1800 mm or 2000 mm. A shop can order a hinged door on one side, or a lockable cash drawer below. The frame comes in matte black, satin white or bronze. List price starts at USD 700 for the 900 mm unit. ukiosks builds this display case in Shenzhen to order, so send your drawing through contact us.
| Specification | Detail |
|---|---|
| Width | 900 mm |
| Height | 1800 mm |
| Depth | 350 mm |
| Doors | 2 sliding glass |
| Shelves | 4 tempered glass |
| Back | Slatwall panel |
| Load | 12 kg per shelf |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:












Reviews
There are no reviews yet.