UniqueKiosk · Shenzhen workshop

Slatted A-Frame Clothing Rail with Two Shelf Trays

$332.00

A-frame clothing rail with two slatted shelf trays for shoes and folded stock. Price range: USD 332-460, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Shelf Trays

Two slatted trays sit low on this clothing rack, one at 300 mm and one at 550 mm. Each tray carries five tube bars, so a shoe pair rests flat without a plate. A shop sets boots on the low tray and folded knits on the high tray. The slats also let dust fall through during a sweep. A shopper sees the stock line from the doorway. Display racks list these trays.

slat shelf clothing rail

A Frame Stance

Each side of this clothing rack forms an A shape with two splayed legs. The legs open 350 mm at the feet and close at the top rail. This stance lets the frame stand without a wall strap. A shopper can pull a coat without tipping the unit. The narrow top also keeps the hang line close to the wall. A shop sets two units 300 mm apart for a full run. Retail displays fixtures share this stance.

clothing rail trays front

Top Rail

The top rail of this clothing rack crosses the frame at 1650 mm and runs 40 mm past each post. The overhang gives a hanger room at the end of the line. A shop hangs twenty pieces on the rail and keeps the trays clear. The rail also takes a clip light for a window shot. Clothing racks list this top rail.

clothing rail trays side

Shop Placement

The clothing rack suits a shoe and denim shop, a studio floor or a small boutique. Trays carry footwear while the rail carries the matching outfits above. A shop uses the frame as a fitted display for one story. The open sides of this clothing rack let two shoppers look at the stock at once. Countertop displays fit the same floor.

Load And Care

The rail holds 70 kg, each tray 25 kg, when weight spreads on the frame. Keep heavy boots on the low tray, since the high tray sits on a lighter weld. A loaded clothing rack stays level within 2 mm across the four feet. Check the tray side welds after a month, since a short weld lets a tray sag. Wipe the tubes and clear the slats of lint. Read more about our bench on our tray build.

clothing rail slat detail

Width Options

Width runs from 900 mm to 1300 mm on request. Height runs at 1600 mm or 1750 mm. A shop can add a third tray at 800 mm for a tall boot line. The trays can also swap for a marble plate. The finish also comes in chalk white or oxide grey. List price starts at USD 332 for the 1000 mm frame. ukiosks builds this clothing rack in Shenzhen to order, so send your sizes through contact us.

Specification Detail
Width 1000 mm
Height 1650 mm
Tube 22 mm round steel
Trays 2 slatted, 300 mm and 550 mm
Leg spread 350 mm
Load 70 kg rail, 25 kg tray
Finish Matte black powder coat

Reviews

There are no reviews yet.

Be the first to review “Slatted A-Frame Clothing Rail with Two Shelf Trays”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop