UniqueKiosk · Shenzhen workshop

Slanted A4 Acrylic Brochure Holder

$78.00

Clear acrylic brochure holder with an A4 slanted back panel and a wide front pocket, 240 mm wide and 300 mm tall. Price range: USD 78-130, set by format and thickness.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

A4 Back Slant

A tall back panel leans at about 12 degrees on this brochure holder. That slant holds an A4 sheet at 210 x 297 mm in a readable pose. The panel rises 140 mm above the pocket line, so the top of the sheet stays clear. A reader sees the full page from a standing spot. The pocket front sits at 100 mm, which leaves the lower text free. The base runs 220 mm deep. This brochure holder shows a full page with no fold and no frame.

slanted A4 brochure holder

Wide Pocket Lip

A wide pocket holds up to 40 sheets on this brochure holder. The lip steps down at the middle, so a thumb reaches under a sheet. Two side walls close the ends and keep the stack square. The pocket depth runs 50 mm. A stapled pack of ten sits flat without a bulge. The lip stops a sheet from slipping when a reader pulls one out. This brochure holder refills in a single push. Our literature displays share the lip step.

brochure holder front view

Panel Construction

Clear cast acrylic of 4 mm builds this brochure holder. Each pocket floor bends from the side wall in one sheet, so no weld crosses the front face. The back panel joins the pocket set with solvent cement, which leaves a thin line at the base. A flame polish clears the cut edge. The unit weighs about 800 g empty. A felt pad under the base stops a slide. This brochure holder keeps a straight face. A countertop easel uses the same sheet.

brochure holder side view

Print Space

The back panel of this brochure holder takes a printed band across the top. We print reverse, so text reads through the clear face. A logo sits at the upper left, where a reader starts. A colour block on the pocket lip marks a service type. A short campaign takes a loose insert behind the sheet. A long run takes a screen print on the rear face. This brochure holder ships clear. A retail sign holder shares the print run.

side wall corner detail

Desk And Showroom

A 240 mm width suits a reception desk, a showroom plinth and a bank counter. An A4 sheet carries a price list, a floor plan or a service terms page. One holder reads one document, which keeps a desk simple. A clerk prints in house and slides a new sheet in. A clear body shows the desk surface under the base. Two units side by side split two languages. Our countertop displays cover a raised format.

Price And Custom Build

List price starts at USD 78 for this A4 brochure holder in clear acrylic. A two pocket body at 320 mm width lands near USD 110. An A4 brochure holder shows a full page at a standing eye. A stepped lip lets a reader pull one sheet at a time. A 4 mm sheet keeps the back panel flat under a stack. This brochure holder pairs with acrylic displays and retail displays fixtures. ukiosks builds this brochure holder to order in Shenzhen. We can reset sheet format, slant angle, pocket depth and print layout. Send your page size and we return drawings and a quote.

Specification Detail
Sheet format A4, 210 x 297 mm
Overall size 240 x 220 x 300 mm
Material 4 mm cast acrylic, clear
Pocket depth 50 mm, about 40 sheets
Back slant About 12 degrees
Edge finish Flame polished
Weight About 800 g

Reviews

There are no reviews yet.

Be the first to review “Slanted A4 Acrylic Brochure Holder”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop