UniqueKiosk · Shenzhen workshop

Rush Wood Grain Retail Display Shelf, 1200 mm

$380.00

Retail display shelf with a steel frame, wood grain back and four shelves. Price range: USD 380-850, set by length and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Shelf Layout

This retail display shelf runs 1200 mm wide. A retail display shelf of this width fills a shop aisle bay. Four shelves step up from a raised plinth, so a row reads in bands. The top shelf sits at 1800 mm, so a tall carton fits. The plinth lifts the base 150 mm, so a floor sweep clears under. One shelf holds 40 cartons. A wood display plan sets the bay.

Frame and Panel

The uprights build from 30 mm steel with a dark powder coat. A retail display shelf in this frame takes a full row with no sag. The back panel carries a wood grain laminate, so a bay reads warm. Each shelf mounts on a bracket, so a staff sets a pitch. The plinth runs a levelling foot at each corner, so a shelf sits flat. A damp cloth clears a panel face.

Aisle Set

A retail display shelf of this build sets in about twenty minutes. A crew sets the uprights, then bolts the back panel. The shelves drop on brackets, so a plan change takes minutes. A shelf joins a second unit at the side, so an aisle runs long. A unit moves on a pallet jack, so a reset takes an hour. The plinth hides a runner, so a cable or a price rail stays out of sight. Our store fixture crew checks the plinth.

Specification Detail
Length 1200 mm
Depth 450 mm
Height 1800 mm
Shelves 4
Upright 30 mm steel
Back Wood grain
Base 150 mm plinth

Store Use

A grocery uses this retail display shelf for a dry goods bay. A wine shop uses one for a bottle row. A pharmacy uses one for a box line. A home store uses one for a small appliance row. Retail shelving of this build fills an aisle. A wall of 6 m takes five units at this width. A shelving run joins two units.

Build Notes

The uprights roll from a coil, then punch on a line for a bracket hole. A retail display shelf of this build keeps a true row after a fill. The panel laminates on a press, so a face reads smooth. The bracket pitch sets at 50 mm, so a plan fits a product height. Each lot is checked for a level plinth and a square panel before packing. Read our bench notes for the frame check.

Sizes and Price

Length runs at 900, 1200 or 1500 mm for this retail display shelf. Shelf count runs at three, four or five. The finish comes wood grain, white or grey. A price rail, a light shelf and a header board are options. List price starts at USD 380 for the 1.2 m unit. ukiosks builds this retail display shelf in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Rush Wood Grain Retail Display Shelf, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop