UniqueKiosk · Shenzhen workshop
Rose Gold Jewelry Showcase With Glass Hood
$1,380.00
Rose gold jewelry glass display case with a glass hood, a lit white deck and an open lower shelf, sized 1.4 x 0.6 x 1.05 m. Price range: USD 300-1,500, set by size and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Glass Hood on Deck
A glass hood sits on the deck of this jewelry showcase. The hood is 1,400 mm wide, 600 mm deep and 250 mm tall. Panels are 6 mm glass with polished edges, joined at a rose gold top rail. The hood lifts off as one piece, so staff restock the deck from above. Under the hood, a white deck panel takes trays and pads. The lower deck is open with a back panel for larger boxes. This glass display case reads warm under shop light. The display cases line offers a taller hood option.
Deck and Light Line
A warm LED strip runs under the deck edge of this glass display case. The strip is 3000 K and faces down, so it lights the lower shelf and the floor. Light also bounces up into the hood from the deck face. Output is about 12 W per metre along one run. A driver sits in the leg frame with a switch at the rear. The white deck spreads light so no diode reads as a point. Every glass display case we build keeps the strip behind a lip. countertop cases cases share the strip.
Frame and Legs
A rose gold frame carries this glass display case. Frame sections are 30 mm steel with a brushed rose gold plate. Four legs run 800 mm to the floor with a 25 mm taper. A mid rail ties the legs on three sides. The hood rail sits on the deck with a gasket, so no glass touches metal. Feet are adjustable to a 15 mm range. Frame joints are welded, ground and plated as one set. retail display fixtures crews set the hood last on site. This glass display case ships with clear fitting notes.
Build and Plating
Steel sections are cut, welded and ground before plating. The plate bath gives an even rose tone across all parts. Glass is cut and polished as a matched set, then packed with a card. Hood rails are glued and sealed at the corners. Every glass display case gets an assembly check on a flat table. Packing is one crate with the hood in a separate sleeve. A two person team sets up in about 40 minutes, per our line notes.
Jewelry Floor Use
This glass display case works for rings, necklaces and watch trays. The hood keeps dust off pads that hold small stock. A 1.4 m run covers three tray positions with a till at one end. Height at 1.05 m puts the deck at a standing shopper hand line. The lower shelf takes gift boxes and bags out of sight. Staff restock in the morning before the shutters open. Many cash counter desks pair with one showcase. The shop fit outs package adds a bench.
Price and Custom Build
A hood sells a ring under glass and keeps the pad clean all day. Rose gold reads warm next to yellow metal stock. A lit lower shelf turns dead space into a second display. List price starts at USD 1,380 for the 1.4 m unit. A 1.8 m build with two hood sections lands near USD 1,720. ukiosks builds this glass display case to order in Shenzhen. We can reset length, hood height, deck colour and frame finish. Send your plan and we return drawings and a quote. Nearby food and drink shops counters use the same leg frame.
| Specification | Detail |
|---|---|
| Overall size | 1.4 x 0.6 x 1.05 m (custom 1.0-2.0 m) |
| Hood | 6 mm glass, 250 mm tall, lift-off |
| Frame | 30 mm steel with rose gold plate |
| Deck | White panel with LED lip |
| Lighting | 3000 K strip, about 12 W per metre |
| Lower shelf | Open shelf with back panel |
| Packing | One crate, about 130 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.