UniqueKiosk · Shenzhen workshop

Ringed Jewellery Counter with Round Glass Hood

$1,450.00

Round glass hood jewellery counter with a black ring frame and four tapered legs. Price range: USD 1,450-2,050, set by diameter.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Round Glass Hood

A round glass hood gives this jewellery counter its shape. The circle runs 900 mm across and 760 mm high at the rim. A bent pane wraps the whole deck on a thin black ring. A shop fills the deck with pads and the circle reads even from every side. The pane for this jewellery counter is laminated, so it holds its curve under a hand. Jewellery displays list this counter size. A matte white plate sits under the glass at 880 mm height.

Ring Frame

Four tapered legs carry this jewellery counter on a slim steel ring frame. Each leg runs 38 mm at the top and 22 mm at the floor. A shop sets the piece on an open floor and the ring reads light from above. Each foot takes a leveller, so a floor that runs 3 mm off still sits flat. A two pack black lacquer covers the ring and the legs. That coat keeps a trolley knock off the finish. Retail displays fixtures use the same ring frame.

Deck Layout

A round deck suits a ring tray, a bracelet pad and a pair of earring cards at once. This jewellery counter lets a clerk turn one tray without moving the rest. The low hood also keeps a spot rig out of the frame line. Two of these counters set 1200 mm apart make a small island pair. A shop keeps the aisle at 1000 mm around the circle. Display cases stand in the same bay.

Styled for Retail

A styled deck turns this jewellery counter into a working display. Grey velvet pads carry the gold bracelets and one ring tray sits near the centre. A shop pairs the circle with a lit wall bay behind and the pieces read bright. Store display racks hold the stock trays beside it. Two earring cards sit at the far edge of the circle. A shopper sees the full set from the entrance.

Load and Care

The glass deck of this jewellery counter holds 22 kg spread over the plate. The ring frame holds 50 kg in total when the load stays near a leg. Keep a heavy tray over a leg, since a slim ring bends between two legs. Wipe the glass with a soft cloth and water only. Dust the lacquer each month. Check the levellers each quarter, since a soft floor lets a foot sink. About our bench covers the bent glass build.

Size Options

The circle runs at 800 mm or 900 mm on request. Height runs at 760 mm or 900 mm. A shop can order a velvet pad set for this jewellery counter. A lock on the hood edge is also available. The ring comes in brass or bronze in place of black. List price starts at USD 1,450 for the 900 mm circle. ukiosks builds this jewellery counter in Shenzhen to order, so send your drawing through contact us.

Specification Detail
Diameter 900 mm
Height 760 mm
Top Bent laminated glass
Frame Black steel ring
Legs 4 tapered, levelled
Deck Matte white plate
Load 22 kg deck, 50 kg total

Reviews

There are no reviews yet.

Be the first to review “Ringed Jewellery Counter with Round Glass Hood”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop