UniqueKiosk · Shenzhen workshop

Rechargeable Desktop LED Light Box A4 Double Sided

$135.00

Rechargeable double sided light box for an A4 sheet, 210 x 297 mm, with a 12 mm aluminium frame and a weighted base. Price range: USD 130-200, set by panel size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Rechargeable Desk Format

A rechargeable light box frees a counter from cables. This unit holds an A4 sheet at 210 x 297 mm and stands on a small base. The frame is 12 mm aluminium with a brushed silver finish. Two acrylic faces sandwich the print, so the same poster shows on both sides. A built in cell runs about 8 hours on one charge. Charging takes 3 hours through a USB C port. The base carries a switch and a small charge light. Staff move the unit to a second counter with no unplugging. Every retail display fixtures team gets a charge test sheet with the unit.

rechargeable desktop light box

Two Acrylic Faces

Two acrylic faces make this light box readable from either side. Each face is 3 mm clear acrylic with a polished edge. A printed sheet slides between them and a magnetic strip holds the top edge. No clip or screw touches the print, so a poster swaps in seconds. A light bar sits on the frame edge and throws light across the panel. A diffuser sheet spreads that light, so no bright line shows. Both faces read the same at 300 mm. A shop can show one offer to the queue and one to the aisle. display cases counters use the same face pair.

desktop light box front view

Light Output And Cell

Light output of this light box is about 900 lux at the panel face. The strip runs at 3000 K, so white paper looks white and not blue. A 4000 mAh cell gives about 8 hours at full output. A dim setting doubles that to 16 hours for an evening event. The driver sits in the base, away from the print. Heat stays low, so a long run does not curl the sheet. A charge light turns from red to green when the cell is full. A spare cell can be swapped on site at any cash counter. This light box ships with clear fitting notes.

desktop light box side view

Frame And Base Build

The frame of this light box is 12 mm aluminium, cut on a saw and joined at 45 degrees. Corners are pinned and polished, so no seam shows. The base is ABS with a weighted insert, so the unit does not tip when bumped. Feet are four rubber pads that grip a glass top. A metal bracket can replace the base for a wall fix. Packing is one carton with a foam cradle. Fitting notes cover the charge port and the switch. countertop cases cases use the same pad set. This light box ships with clear fitting notes.

light box base and switch

Where It Sits

This light box suits a cafe till, a bar top and a hotel desk. An A4 face fits a drinks menu, a price list or a small promo. On a counter it reads at 1.5 m without a second printed sign. The two faces cover both directions of a queue. A cell means no cable across a serving area. At 210 mm wide it leaves room for a card reader. Many shop fit outs add one at each service point. food and drink shops often take two per counter.

Price And Custom Build

List price starts at USD 135 for this A4 unit. A custom print face and a branded base cap land near USD 180. The case reads bright over a full shift and needs no mains lead. A magnetic face swap keeps posters current with no tools. A weighted base holds on a busy counter. ukiosks builds this light box to order in Shenzhen. We can reset panel size, frame colour, cell capacity and base shape. Send your plan and we return drawings and a quote.

Specification Detail
Panel size A4, 210 x 297 mm (custom A5-A3)
Frame 12 mm aluminium, brushed silver
Faces Two 3 mm acrylic panels
Cell 4000 mAh, about 8 hours
Light LED at 3000 K, about 900 lux
Base ABS with weighted insert
Packing One carton with foam cradle

Reviews

There are no reviews yet.

Be the first to review “Rechargeable Desktop LED Light Box A4 Double Sided”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop