UniqueKiosk · Shenzhen workshop

Quartz White Frame Optical Display Table, 1800 mm

$390.00

Optical display table in a white steel frame with wood cabinets, a sloped divided tray and a glass top shelf. Price range: USD 390-880, set by width and cabinet count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Tray and Cabinet

This optical display table runs 1800 mm wide and 900 mm deep. An optical display table of this size shows 24 frames in one glance. The top tray slopes at 15 degrees, so a lens face reads from a standing eye. Each cell takes one frame on a soft pad. A wood cabinet below holds 200 frames behind four doors. A glass shelf runs above the tray for a brand line. A retail display plan sets the frame line.

Frame Build

The frame is 40 mm steel tube with a white powder coat. An optical display table in this tube takes a full tray without a bend. The wood panels are 18 mm board with a light oak laminate. The tray inserts sit in a slot, so a staff swaps a cell block in a minute. The glass shelf holds 6 mm tempered glass. A damp cloth clears a print from a laminate face.

Shop Setup

An optical display table of this build sets in about 50 minutes with two staff. The cabinet stands first, then the frame goes on top, then the tray and the glass shelf. The doors line up on a hinge, so a run reads even. The feet carry a leveller, so a table stands true on tile. A table works beside a wall or mid floor. The table splits into four parts for a lift. Our store fixture crew packs this cabinet.

Specification Detail
Width 1800 mm
Depth 900 mm
Height 1200 mm
Tray cells 24
Cabinet 4 doors
Frame 40 mm tube
Finish White and oak

Store Use

An optical shop uses this optical display table for a new frame line. A clinic uses one for a fitting bay. A sunglasses shop uses one for a summer drop. A department store uses one for a brand corner. Countertop displays of this build sit on the tray. A bay of 2000 mm takes one table with a walk lane. A glass display case holds the stock.

Build Notes

The tube cuts on a saw, then welds on a jig for a square corner. An optical display table of this build keeps a level tray after a move. The tray inserts cut on a CNC, so a cell reads even. The laminate presses on a hot press, so a face holds flat. Each lot is checked for a level tray and a free door before packing. Read our bench notes for the tray check.

Sizes and Price

Width runs at 1200, 1500 or 1800 mm for this optical display table. The tray cell count runs at 12, 18 or 24. The finish comes white with light oak, grey or walnut. A mirror, a light bar and a drawer bank are options. List price starts at USD 390 for the 1800 mm table. ukiosks builds this optical display table in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Quartz White Frame Optical Display Table, 1800 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop