UniqueKiosk · Shenzhen workshop

Oxbow Cash Wrap Counter with Monitor Hutch and Cubby Shelves

$1,250.00

Walnut cash wrap counter with a grey metal top, open cubby shelves, two drawers and a raised hutch. Price range: USD 1,250-1,850, set by length.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Counter Footprint

This cash wrap counter measures 1500 mm wide, 700 mm deep and 900 mm high. The grey metal top takes the till, a card terminal and a bag stack. A shop keeps the top clear and the queue moves fast. The unit stands on a plinth with a 20 mm skim, so the base clears a mop. A cash wrap counter this size fits a small store and still serves two staff. Retail counters list this length. The back edge carries a low screen, so nothing rolls off the top.

Cubby and Drawers

An open cubby run sits on the left of the cash wrap counter. Two shelves and a small drawer block sit under it. Bags, tissue and a tape gun live in the cubbies. The right side is a full open bay for a bin or a crate. Two drawers take a soft close slide and a key lock. A shop can drop a cash tray into the top drawer. Display cases use this drawer depth. Shelf spacing runs 180 mm, so a stack of folded bags fits.

Raised Hutch

A raised hutch sits behind the top of this cash wrap counter. The panel runs 700 mm tall and 650 mm wide with a dark finish. A shop mounts a screen inside or leaves the niche empty for a lamp. The hutch frame is a rounded steel box with a walnut face. The dark panel cuts glare from a ceiling light. Store fixtures share this hutch height. The niche also hides a cable run behind the panel.

Build Details

The body uses 18 mm plywood with walnut veneer and a matte lacquer. The top is 25 mm steel sheet with a powder coat in warm grey. Joints are welded, ground and sealed. The kick rail takes a brass edge and lifts the dark base off the floor. A cash wrap counter of this build carries 120 kg on the top. A till and a screen sit safe there. Every unit leaves the bench after a level check on the plinth. A shop can also fit a shelf under the top, and the bay reads deeper. Read more on display shelves.

Store Use

Small boutiques put this cash wrap counter near the door. A cash wrap counter at the door keeps the floor open. A barber shop uses it as a reception desk with a booking terminal. A pop up shop pairs it with a display case and closes the sale at the same spot. The open bay also takes a bin for returns. Countertop displays sit on the top beside the till. A shop with two staff can run one lane and keep the second bay free.

Options and Price

Length runs at 1200 mm, 1500 mm or 1800 mm. A shop can order one open bay or two. Drawer count runs from two to four. The top comes in grey, black or a light stone finish. A cable hatch, a shelf under the top and a low back screen are options. The veneer comes in walnut, oak or a plain laminate. List price starts at USD 1,250 for the 1500 mm unit. ukiosks builds this cash wrap counter in Shenzhen to order, so send your layout through contact us.

Specification Detail
Length 1500 mm
Depth 700 mm
Height 900 mm
Top 25 mm steel, grey powder coat
Storage 2 cubby shelves, 2 drawers
Hutch 700 mm tall, 650 mm wide
Load 120 kg on the top

Reviews

There are no reviews yet.

Be the first to review “Oxbow Cash Wrap Counter with Monitor Hutch and Cubby Shelves”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop