UniqueKiosk · Shenzhen workshop

Orrin Oak Four-Tier Magazine Display Stand, 1500 mm

$240.00

Magazine display in oak with four slanted shelves and a floor foot rail. Price range: USD 240-520, set by shelf count and height.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Slanted Shelves

This magazine display stands 1500 mm tall and 600 mm wide. A magazine display with four slanted shelves keeps titles face up. Each shelf leans at 20 degrees, so a cover shows from a step back. The shelf runs 100 mm deep with a front lip. A lip pad holds a thin brochure in place. A shop loads a new issue on the top shelf in one motion. A shelving unit shares this lip.

Oak Frame

The panels and shelves are 18 mm oak with a clear matte coat. A magazine display in this wood shows a warm face under a shop light. The side panels carry a groove for each shelf, so no screw shows. The shelf is pinned at the groove and glued at the lip. A foot rail joins the panels at the floor. A dry cloth clears a dust line.

Floor Stance

Two T-feet at 400 mm hold the stand upright. A magazine display of this build leans back 5 degrees, so it stays put on a light push. The base needs 450 mm of depth. An entrance bay of 700 mm lets a customer read the top shelf. A shop places it near a till or a door. A card rail sits on the top lip for a price mark. Our sign holder clips on this lip.

Specification Detail
Height 1500 mm
Width 600 mm
Shelves Four, 20 deg
Shelf Depth 100 mm
Panel 18 mm oak
Feet 400 mm T-feet
Weight 22 kg

Shop Use

A bookshop sets this magazine display near a door. A bank uses one for a brochure line. A clinic uses one for a service leaflet. A trade show uses one at a booth edge. Retail displays of this build pair with a leaflet holder. A floor space of 700 mm holds the base with room to pass. A store fixture set starts here.

Build Notes

The oak is cut on a panel saw with a stop, so two stands match in width. A magazine display of this build keeps a flat shelf after a move. The groove is cut on a router with a guide, so each shelf sits level. The lip is a strip glued and pinned at the shelf face. Each unit is checked for a level shelf and a firm foot before packing. Read our bench notes for the groove detail.

Sizes and Price

Height runs at 1200, 1500 or 1800 mm for this magazine display. Shelf count runs at three, four or five. Width runs at 500 or 600 mm. The finish comes in light oak, walnut or white. A card rail, a leaflet tray and a carry carton are options. List price starts at USD 240 for the 1500 mm unit. ukiosks builds this magazine display in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Orrin Oak Four-Tier Magazine Display Stand, 1500 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop