UniqueKiosk · Shenzhen workshop

Orchard Heritage Cabinet with Crown Top and Glass Hood

$2,350.00

Heritage display cabinet with a dark crown, full glass hood, lit white platform and base storage. Price range: USD 2,350-3,900, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Case Shape

This heritage display cabinet stands 2100 mm tall on a 1200 mm wide footprint. A dark crown caps the glass and a base cabinet closes the bottom. The glass hood runs on all four sides, so a visitor reads a piece from two angles at once. A heritage display cabinet of this size suits a museum room with low ceilings. The crown runs 320 mm deep and hides a light track inside. A base cabinet at 450 mm tall takes tools, mounts and spare bulbs. Display cases list this footprint.

Lit Platform

A white platform sits inside the hood at 900 mm above the floor. The platform carries up to 35 kg across three zones. A light track sits under the crown and runs at 3000 K with a UV filter. A heritage display cabinet with a lit platform keeps a ceramic vessel readable from the room door. The platform has a felt option, so a bowl does not slide. A small card stand mounts on a rail at the platform edge. Jewellery displays share this platform build.

Glass and Seal

The hood uses 10 mm low iron glass on all sides, so the edge reads clear rather than green. Corners are bonded and capped at the base rail. A rubber gasket sits between the hood and the crown and cuts dust. A heritage display cabinet with a sealed hood needs less cleaning in a dry room. The glass lifts off in two panels for a full reset. A lock bar sits at the base rail and takes one key for the hood. Display shelves use the same glass grade.

Build Notes

The crown and base use 18 mm plywood with a dark walnut stain and a matte lacquer. The base cabinet runs on a plinth with a brass strip. Steel parts are welded, ground and powder coated in black. A heritage display cabinet of this build stays level within 1 mm on a stone floor. Each unit leaves the bench after a light test and a hood fit test. A heritage display cabinet with a loose rail is reset on the bench. Read more on our bench. A gap between the hood and the crown shows as a shadow line. The rail is measured before the glass is ordered.

Where It Works

Museums use this heritage display cabinet for ceramics, bronze and small sculpture. A private collection sets one piece per unit and keeps the labels on the rail. A hotel lobby puts a single vessel behind glass and the room reads curated. A university archive uses two units side by side for a small show. Store fixtures share this base height. A gallery with low light likes the white platform, since it lifts the object tone. A heritage display cabinet here also keeps dust off the piece.

Sizes and Price

Width runs at 900 mm, 1200 mm or 1500 mm. Height runs at 1900 mm or 2100 mm. Platform height runs at 850 mm or 900 mm. The finish comes in dark walnut, black oak or a painted matte. A UV filter, a card rail and a base drawer are options. A shop can also order a double hood for two objects. List price starts at USD 2,350 for the 1200 mm unit. ukiosks builds this heritage display cabinet in Shenzhen to order, so send your drawing through contact us.

Specification Detail
Width 1200 mm
Height 2100 mm
Platform Height 900 mm
Hood Glass 10 mm low iron
Light 3000 K with UV filter
Base Cabinet with plinth
Load 35 kg on the platform

Reviews

There are no reviews yet.

Be the first to review “Orchard Heritage Cabinet with Crown Top and Glass Hood”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop