UniqueKiosk · Shenzhen workshop
Opal White Steel Slatwall Shelf Bracket, 250 mm
$28.00
Shelf bracket in white steel with a slat lip plate and a front lip, sold as a pair. Price range: USD 28-70, set by arm length and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Lip and Arm
This shelf bracket runs a 250 mm arm from the lip plate. A shelf bracket of this length takes a 300 mm shelf with a 50 mm reveal. The lip plate hooks into a 60 mm slat on a 25 mm pitch wall. The arm tapers from 45 mm to 30 mm at the tip. The front lip turns up 12 mm, so a shelf stays put. A pair of brackets holds a 40 kg load across a 900 mm span. A retail display wall uses this pair.
Steel Build
The body is 2 mm steel with a white powder coat. A shelf bracket in this gauge holds a glass shelf without a flex. The lip plate is folded in one press, so the hook line stays true. Two screws fix the arm to a shelf from below. The edge is deburred by hand, so a shelf face stays clean. A dry cloth clears a dust line from the coat.
Wall Set
A shelf bracket of this depth sets a shelf 250 mm off the wall. A shop sets two brackets at 600 mm centres for a 900 mm shelf. The pair must sit in the same slat row, so the shelf stays level. A staff mounts a shelf in about four minutes with a driver. A slat insert adds a clean line at the join. A levelling shim takes a slat run of 2 mm. Our store fixture bay shares this row.
| Specification | Detail |
|---|---|
| Arm | 250 mm |
| Steel | 2 mm |
| Front Lip | 12 mm |
| Load | 40 kg per pair |
| Finish | White |
| Pack | Pair |
| Weight | 1.1 kg |
Shop Use
A boutique sets this shelf bracket on a slatwall bay. A shoe shop uses a pair for a display shelf. A pharmacy uses one for a carded shelf. A trade show uses a pair on a panel wall. Shelving of this build pairs with a slatwall panel. A bay of 1000 mm holds two shelves and a hook row. A wire grid display panel takes the same hook.
Build Notes
The plate is stamped from a coil, then folded on a die. A shelf bracket of this build keeps a square hook after a move. The arm is welded to the plate at a 90 degree angle. The frame is phosphated before the powder coat. Each unit is checked for a true hook and a flat arm before packing. Read our bench notes for the fold line.
Sizes and Price
Arm length runs at 150, 200 or 250 mm for this shelf bracket. The finish comes in white, chrome or black. The front lip comes plain or upturned. The pack runs as a pair or a box of ten. A slat insert, a screw pack and a shim set are options. List price starts at USD 28 for a 250 mm pair. ukiosks builds this shelf bracket in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.