UniqueKiosk · Shenzhen workshop
Olive Clear Acrylic Sign Holder with Base, 210 mm
$18.00
Sign holder in clear acrylic with a slotted base block, made for A5 cards on a counter. Price range: USD 18-42, set by card size and pack.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Panel and Base
This sign holder stands 210 mm tall on a 90 mm base. A sign holder of this size takes an A5 card, so a menu reads at a counter. The panel holds a card of 0.5 mm, so a print stays flat. The base block runs 20 mm thick, so a holder stands firm. The slot opens at the top, so a card slides in without a frame. A holder weighs 260 g. A retail display counter takes this holder.
Acrylic Build
The body is 3 mm cast acrylic with a polished edge. A sign holder in this sheet shows a clear face without a green tint. The panel bonds to the base with a solvent, so a joint stays clear. The top edge flame polishes, so a hand stays clear of a burr. The base carries four pads, so a counter stays scratch free. A dry cloth clears a smudge from the panel.
Counter Set
A sign holder of this height sits at a till or a display table. A staff swaps a card in about ten seconds, so a promo change stays quick. The holder takes a double sided print, so a card reads both ways. The base width of 90 mm fits a narrow shelf. A holder group of three sets a card line at 300 mm pitch. A holder works on wood, glass or stone. Our store fixture set shares this base.
| Specification | Detail |
|---|---|
| Height | 210 mm |
| Base | 90 mm |
| Acrylic | 3 mm |
| Card | A5 |
| Slot | 0.5 mm |
| Weight | 260 g |
| Edge | Polished |
Shop Use
A cafe sets this sign holder on a counter. A boutique uses one for a price note. A chemist uses one for a service card. A trade show uses six at a booth. Countertop displays of this build pair with a card stand. A counter of 1200 mm holds four holders with room for stock. A jewelry display pad fits beside it.
Build Notes
The sheet cuts on a laser, then polishes on a wheel. A sign holder of this build keeps a clear edge after a year. The base bonds in a jig, so a panel stands square. The slot mills at 3.2 mm, so a card fits with a slight grip. Each lot is checked for a clear face and a level base before packing. Read our bench notes for the base bond.
Sizes and Price
Card size runs at A6, A5 or A4 for this sign holder. The base comes block or foot. The panel comes single or double sided. The edge comes polished or flame cut. A card set, a felt pad and a carry box are options. List price starts at USD 18 for the A5 holder. ukiosks builds this sign holder in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.