UniqueKiosk · Shenzhen workshop

Ness White Pegboard Spinner Rack with Sixty Hooks, 500 mm

$120.00

Spinner rack in white steel with four pegboard faces, sixty hooks and a round base plate. Price range: USD 120-260, set by hook count and height.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Four Faces

This spinner rack stands 500 mm tall on a counter. A spinner rack with four pegboard faces shows stock from every side of an aisle. Each face carries fifteen hooks in three rows. The faces join at the corner, so no gap shows at the edge. The hole pitch runs 25 mm, so a hook moves in a straight step. A shop turns the unit with one hand on the top handles. A display stand turns the same way.

Steel and Coat

The panels are 1 mm steel with a white powder coat. A spinner rack in this coat keeps a clean face after a season of hooks. The holes are punched on a bed press, so the grid stays even. The coat bakes at 180 degrees, so it does not crack at a hole. A shop wipes the faces with a damp cloth. The white face reflects light, so a dark pair of sunglasses reads clear.

Hooks and Base

Sixty white peg hooks clip into the hole grid. A spinner rack with a 100 mm hook takes a carded item or a small pack. The hooks lift out for a reset and leave no mark. The base is a round plate at 300 mm with a bearing under it. Four pads sit under the plate, so a glass counter takes no scratch. The unit turns with a light push and stops where it is set. Our acrylic display uses this base plate.

Specification Detail
Height 500 mm
Faces Four pegboard
Hooks Sixty, 100 mm
Hole Pitch 25 mm
Base Round plate, 300 mm
Coat White powder
Weight 7 kg

Counter and Aisle

An optician sets this spinner rack on a counter for a sunglass line. A hair salon uses one for clips and bands. A gift shop uses one for keyrings. A pop up stall uses one on a small table. Countertop displays of this build pair with a card stand. A counter with 400 mm of depth fits the unit with room to turn. A store fixture set sits beside it.

Build Notes

The panels are punched and cut, then folded at the corner. A spinner rack of this build keeps a square face after a move. The bearing sits in a pressed housing under the plate. The hooks are a steel wire with a plastic tip, so a card does not tear. Each unit is checked for a free turn and a level plate before packing. Read our bench notes for the bearing detail.

Sizes and Price

Height runs at 400, 500 or 700 mm for this spinner rack. Hook count runs at thirty, sixty or ninety. Hook length runs at 75 or 100 mm. The coat comes in white, black or a chrome plate. A sign holder, a locking base and a carry carton are options. List price starts at USD 120 for the 500 mm unit. ukiosks builds this spinner rack in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Ness White Pegboard Spinner Rack with Sixty Hooks, 500 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop