UniqueKiosk · Shenzhen workshop

Navy Wall Display Cabinet with Walnut Slat Back

$1,280.00

Navy wall mounted display cabinet with four shelf bays, walnut slat back, two cubbies and three drawers. Price range: USD 1,280-1,860, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Navy and Walnut

A deep navy lacquer body frames this display case on the wall. The cabinet runs 1800 mm wide and 2100 mm tall with a 350 mm depth. A walnut slat panel fills the back of every shelf bay. A shop sets the navy against a pale wall and the two tones read apart. Display cases list this cabinet size. A warm wood back also keeps a small item from floating.

Four Shelf Bays

Four shelf bays divide this display case at 380 mm pitch. Each bay takes a navy deck plate on a hidden cleat, and the walnut back runs behind. A shop sets a boxed set on the low bay and a tall bottle above. The cleat on this display case also moves on a 50 mm slot, so the pitch changes without a drill. Display shelves use this bay pitch.

Cubbies and Drawers

Two open cubbies sit under the shelf bays of this display case. Each cubby runs 600 mm wide. Three drawers close the base at 300 mm high, each on a ball bearing slide with a bar handle. A shop keeps the tissue and the tags inside the drawers. The cubbies also take a folded stock or a gift bag. Countertop displays share this drawer depth. A wide cubby also takes a folded gift bag flat.

Where It Fits

This display case fits a menswear floor, a watch lounge or a hotel shop. The 1800 mm width lets one unit cover a dressing bay with a 400 mm margin. A shop sets the case 300 mm off the floor and keeps the aisle at 1000 mm. A navy finish also reads firm beside a brass rail. Retail displays fixtures fit the same bay. A deep bay also takes a stacked box out of sight.

Load and Care

Each bay of this display case holds 25 kg and the drawer set holds 20 kg. Keep a heavy item on the low bay, since a cleat takes a point load best near the rail. The cabinet stays plumb within 2 mm when the wall batten sits level. Wipe the lacquer with a dry cloth and the walnut with a soft brush. Check the wall screws each season, since a loose screw drops the frame line. Read more about our bench on our cabinet builds.

Size Options

Width runs at 1500 mm or 1800 mm on request. Height runs at 2100 mm or 2400 mm. A shop can order a glass door over the bays and a lit rail under each shelf. An oak back is also available in place of walnut. The body also comes in graphite or forest green. List price starts at USD 1,280 for the 1800 mm unit. ukiosks builds this display case in Shenzhen to order, so send your drawing through contact us.

Specification Detail
Width 1800 mm
Height 2100 mm
Depth 350 mm
Bays 4, walnut slat back
Base 3 drawers, 2 cubbies
Body Navy lacquer
Load 25 kg bay, 20 kg drawers

Reviews

There are no reviews yet.

Be the first to review “Navy Wall Display Cabinet with Walnut Slat Back”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop